Accumulative roll bonding (ARB) imposes severe plastic strain on materials without changing the specimen dimensions. ARB process is mostly appropriate for practical applications because it can be performed readily by the conventional rolling process. An Al-2wt%Cu alloy was subjected to ARB process up to a strain of 4.8. Stacking of materials and conventional roll-bonding are repeated in the pro...

Abstract: Plasma electrolytic oxidation (PEO) technique was used to prepare ceramic coatings on the casted aluminum alloys containing ~5 and ~9.5 wt.% Mg. The applied voltage was controlled at 450V and 550V for evaluating the effect of this main parameter, as well as, magnesium content of the substrate on the microstructure and electrochemical corrosion behavior after PEO treating. The results ...

The Electrochemical Noise Method (ENM) has particular attractions because of its nonintrusive nature, quickness in gathering data and ease of interpretation. The electrode arrangement for the standard (“Bridge”) method of conducting ENM requires two separate working electrodes e.g. two painted Q panels and a reference electrode. Although satisfactory for laboratory use, it is not so suitable fo...

This paper introduces a Transimpedance Amplifier (TIA) design capable of producing an incremental input resistance in the ohmic range, for signals microampere such as are encountered instrumentation electrochemical ampero-metric sensors, optical-sensing and current-mode circuits. low input-resistance is achieved using stage incorporating negative feedback. In Cadence simulation exemplary 180 nm...

A novel method for fabricating an adhesive resistance surface is presented. Sandblasting and electrochemical machining were introduced to prepare micro-nano structures on the sample surface. Then, the prepared sample was immersed in a tridecafluoroctyltriethoxysilane ethanol solvent. The surface of the aluminum alloy sample roughened and covered with low-surface-energy chemical groups was exami...

In this study, the corrosion resistance of Ag-Au-Cu-Pd system alloys consisting of 5 or 10 mass% indium was evaluated. Levels of element release and tarnish were determined and electrochemical measurements performed. Results were compared with those for commercial silver-palladium-gold alloy. In terms of electrochemical behavior, the transpassive potential of these experimental alloys was 168-2...

The electrochemical stability of Li6.5La3Zr1.5Nb0.5O12 (LLZNO) and Li6.5La3Zr1.5Ta0.5O12 (LLZTO) against metallic Li was studied using direct current (DC) and electrochemical impedance spectroscopy (EIS). Dense polycrystalline LLZNO (ρ = 97%) and LLZTO (ρ = 92%) were made using sol–gel synthesis and rapid induction hot-pressing at 1100°C and 15.8 MPa. During DC cycling tests at room temperature...

This communication reports a nanocatalyst-based electrochemical assay for proteins. Ultrasensitive detection has been achieved by signal amplification combined with noise reduction: the signal is amplified both by the catalytic reduction of p-nitrophenol to p-aminophenol by gold-nanocatalyst labels and by the chemical reduction of p-quinone imine to p-aminophenol by NaBH4; the noise is reduced ...

Various stimulation desynchronization techniques are explored in a laboratory experiment on electrochemical oscillators, a system that exhibits transient dynamics, heterogeneities, and inherent noise. Stimulation with a short, single pulse applied at a vulnerable phase can effectively desynchronize a cluster. A double pulse method, that can be applied at any phase, can be improved either by add...