نتایج جستجو برای: electrophoretic deposition
تعداد نتایج: 108171 فیلتر نتایج به سال:
The aim of this study was to evaluate hydroxyapatite (HA) coatings produced by dynamic voltage during electrophoretic deposition (EPD). Dynamic voltages from 0 to 200 V were incrementally applied in three interims. The as-deposited coating was sintered at 800 degrees C and its properties evaluated. Structure and phase analyses of both as-deposited and sintered coatings were evaluated by scannin...
SUS316L stainless steel has been widely used in medical applications. However, some germs frequently adhere to the device surface, resulting infections following implantation surgery. Unfortunately, material lacks antibacterial characteristics that prevent microorganisms from adhering surface. This study aims use electrophoretic deposition deposit chitosan/silver (Ag) as an agent on 316L. The a...
The application of ceramic protective coatings to the metallic interconnects in solid oxide cells (SOCs) is a viable and effective method limit interconnect degradation issues. This featured letter provides critical overview main outcomes current research on use electrophoretic deposition (EPD) technique produce for SOC interconnects, specifically focusing different approaches stabilise spinel-...
We report an electrophoretic deposition method for the fabrication of gold nanoparticle (GNP) thin films as sensitive surface-enhanced Raman scattering (SERS) substrates. In this method, GNP sol, synthesized by a seed-mediated growth approach, and indium tin oxide (ITO) glass substrates were utilized as an electrophoretic solution and electrodes, respectively. From the scanning electron microsc...
Metallic biomaterials such as 316L stainless steel (SS316L) are widely used an implant to replace the function of damaged bone, especially in hip or knee applications. However, many them fail during a short period have complications. The biocompatibility issues main factor that caused this failure. Thus, coating SS316L with bioactive and biocompatible material is one promising techniques enhanc...
Layers of porous TiO(2) fabricated by electrophoretic deposition at different temperatures with subsequent sintering in air were investigated by transient photocurrent measurements in aqueous electrolyte. The effective diffusion coefficient of excess electrons changed between 1.6 x 10(-5) and 1.4 x 10(-4) cm(2)/s depending strongly on the solution temperature during the TiO(2) layer deposition....
In the present study, Mn - Cr spinel powder was synthesized through a solid state reaction. In the next step, the electrophoretic deposition (EPD) method was used to apply the MnCr2O4 spinel, as an oxidation-resistant layer, on SUS 430 stainless steel in a potential of 300 V/cm. The coated and uncoated samples were then pre-sintered in air at 900 °C for 3 h followed by cyclic oxidation at 800 °...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید