Cascaded thermal storage, consisting of multiple Phase Change Materials (PCMs) with different melting temperatures, has been proposed to solve the problem of poor heat transfer caused by unavoidable decrease of temperature differences during heat exchange process. This paper conducts a theoretical study of the overall thermal performance for a cascaded thermal storage system. Both heat transfer...

TThe present paper evaluates the plan of combustion air pre-heater installation on the fired heater from thermodynamics and thermos-economics point of view. As a real case study, one of the fired heaters (H_101) of Distillation unit in Tehran Oil Refinery, Iran, is intended. With applying an air pre-heater in this study, flue gases temperature falls down from 430 ºC to 200ºCand combustion a...

Electrifying transportation is a promising approach to alleviate climate change issues arising from increased emissions. This study examines a system for the production of hydrogen using renewable energy sources as well as its use in buses. The electricity requirements for the production of hydrogen through the electrolysis of water, are covered by renewable energy sources. Fuel cells are being...

This paper presents an experimental investigation on a four-stroke single cylinder diesel engine fuelled with the blends of Mahua oil methyl ester (MOME) and diesel. The performance emission, energy, and exergy analysis has been carried out in B20 (mixture of 80% diesel by volume with 20% MOME). From energy analysis, it was observed that the fuel energy input as well as energy carried away by e...

This paper presents the exergy analysis of a desalination unit using humidification-dehumidification process. Here, this unit is considered as a thermal system with three main components, which are the heating unit by using a solar collector, the evaporator or the humidifier, and the condenser or the dehumidifier. In these components the exergy is a measure of the quality or grade of energy and...

Comparative energy and exergy investigations are reported for a transcritical N2O refrigeration cycle with a throttling valve or with an expander when the gas cooler exit temperature varies from 30 to 55 ◦C and the evaporating temperature varies from −40 to 10 ◦C. The system performance is also compared with that of similar cycles using CO2. Results show that the N2O expander cycle exhibits a l...

In order to evaluate and improve the performance of a ground-coupled heat pump (GCHP) heating system with radiant floors as terminals, an exergy analysis based on test results is performed in this study. The system is divided into four subsystems, and the exergy loss and exergy efficiency of each subsystem are calculated using the expressions derived based on exergy balance equations. The avera...

recent developments in hydrogen production by thermochemical water decomposition are reported,with an emphasis on hydrogen production from non-fossil energy sources such as nuclear and solar. numerousdevelopments have been made on sulphur-iodine, copper-chlorine and other thermochemicalcycles. efforts are described to lower the temperatures required in thermochemical cycles, so as to broadenthe...

and Tribus, 1962), which is also named exergoeconomics (Bejan et al, 1996) and exergonomics (Yantovskii, 1994). The concept of utility is a central concept in macroeconomics. Utility is also closely related to exergy, and an exergy tax is an example of how exergy could be introduced into macroeconomics. This paper introduces and clarifies important concepts in the development of a sustainable e...

National exergy efficiency analysis relates the quality of primary energy inputs to an economy with end useful work in sectoral energy uses such as transport, heat and electrical devices. This approach has been used by a range of authors to explore insights to macroscale energy systems and linkages with economic growth. However, these analyses use a variety of calculation methods with sometimes...