A granular material is most likely to possess an initial anisotropic structure due to the depositional process or the previous stress history. There is also induced fabric anisotropy during shearing. Concerning the significant influence of fabric anisotropy on the stress-strain behaviour of a granular material, in-depth investigation on the two kinds of fabric anisotropy is essential. Initial f...

ct such as color or width inconsistencies, slubs, broken ends, etc. The tests on the quality of yarns are usually performed at the output of spinning-mills. Quality test runs for looms and knitting machines require interruption of the weaving process. This interruption is not practically feasible for the machines that are intended for large production runs of fabric rolls. The quality test is c...

a newly designed printed slot antenna is presented that incorporates variable two band-notched functions for ultra-wideband (uwb) applications. the two band notches of this coplanar waveguide (cpw) fed antenna are achieved by an m-shaped slot (mss) embedded in the radiating element and a c-shaped strip(css) close to ground plane, therefore two very narrow rejected properties in the wireless loc...

The GIGAswitch system is a high-performance packet-switching platform built on a 36-port 100 Mb/s crossbar switching fabric. The crossbar is data link independent and is capable of making 6.25 million connections per second. Digital's first GIGAswitch system product uses 2-port FDDI line cards to construct a 22-port IEEE 802.1d FDDI bridge. The FDDI bridge implements distributed forwarding in h...

This paper presents FabricKeyboard: a novel deformable keyboard interface based on a multi-modal fabric sensate surface. Multi-layer fabric sensors that detect touch, proximity, electric field, pressure, and stretch are machine-sewn in a keyboard pattern on a stretchable substrate. The result is a fabric-based musical controller that combines both the discrete controls of a keyboard and various...

There are instruments available to measure the drape coefficient of fabric. The most widely accepted method (IS 8357:1977) is hang a circular fabric sample and measure the drape coefficient. This measurement technique gives quite a bit of fair idea about drape coefficient of a fabric in static condition. But when it’s static condition is disturbed as the case in practical application of fabric ...

A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...

Antenna 3D pattern measurement can be a tedious and time consuming task even for antennas with manageable sizes inside anechoic chambers. Performing onsite measurements by scanning the whole 4π [sr] solid angle around the antenna under test (AUT) is more complicated. In this paper, with the aim of minimum duration of flight, a test scenario using unmanned aerial vehicles (UAV) is proposed. A pr...

Osteoporosis leads to hip fractures in aging populations and is diagnosed by modern medical imaging techniques such as quantitative computed tomography (QCT). Hip fracture sites involve trabecular bone, whose strength is determined by volume fraction and orientation, known as fabric. However, bone fabric cannot be reliably assessed in clinical QCT images of proximal femur. Accordingly, we propo...

Many fabric defects are very small and undistinguishable, which makes them very difficult to detect by only monitoring the intensity change. Faultless fabric is a repetitive and regular global texture and Fourier transform can be applied to monitor the spatial frequency spectrum of a fabric. When a defect occurs in fabric, its regular structure is changed so that the corresponding intensity at ...