The paper presents the results of casting and testing of 264 GFRC specimens. The glass fibers were 25 mm long, with the aspect ratio (L/D) ranging between 1250 and 3570. The parameters studied were the ratio (by weight) of fibers to cement, i.e. F/C=0%, 1.5%, 3%, and 4.5%, and the ratio of coarse to fine aggregates (gravel to sand), i.e. G/S=1.1, 0.7 and 0.2. In total, 12 mix designs were selec...

Durability of concrete structure in marine environments is a big issue for many decades due to chloride attack. Chloride penetrates the concrete structure and accelerates the corrosion process of reinforcement which decreases the life of those structures. Also shrinkage cracks in concrete play main role for chloride penetration through concrete surface.  Many researchers tried to find easy and ...

A plasticity-fracture constitutive model is presented for prediction of the behavior of confined plain concrete. A three-parameter yield surface is used to define the elastic limit. Volumetric plastic strain is defined as hardening parameter, which together with a nonlinear plastic potential forms a non-associated flow rule. The use of non-associated flow rule improves the prediction of the dil...

A far-field airborne radar (FAR) nondestructive testing (NDT) technique integrating inverse synthetic aperture radar (ISAR) measurements and a backprojection algorithm for the condition assessment of glass fiber reinforced polymer (GFRP)–wrapped concrete structures is proposed. The method is directed toward the detection of near-surface defects and delaminations located in the vicinity of GFRP–...

High performance fiber reinforced cement-based composite (HPFRCC) materials have unique properties that are advantageous for many structural applications. In direct tension these materials can reach strains between 0.5% and 6% depending on material and specimen geometry. The large tensile strain capacity allows these materials to strain compatibly with steel reinforcement and achieve higher ten...

Adding steel braces to reinforced concrete frames is a common way for seismic rehabilitation of these structures. Due to ease of installation and the possibility of creating openings in the braced bays, this method of rehabilitation has been more preferred than using shear walls. In this paper, three experimental specimens including a reinforced concrete frame, a reinforced concrete frame with ...

Cementitious matrices are the fragile materials that possess a low tensile strength. The addition of fibers randomly distributed in these matrices improves their resistance to cracking, substantially. However, the incorporation of fibers into a plain concrete disrupts the granular skeleton and quickly causes problems of mixing as a result of the loss of mixture workability that will be translat...

Experimental studies were conducted by some researchers to investigate the cyclic performance of CFSretrofitted columns; however there is a need to develop analytical methods which can simulate its hysteretic response. This study presents an analysis of the hysteretic behavior of CFS-retrofitted reinforced concrete circular columns. Fiber element analysis was conducted based on cyclic constitut...