The influences of ultrasonic vibration during cold metal transfer welding process on the microstructure, element distribution and pitting resistance AISI 430 ferritic stainless steel joints with ER 308L as filler were investigated. combined effects mechanical vibration, acoustic streaming cavitation significantly refined primary ferrite grain in weld then impacted subsequent solid-phase transit...

The dissimilar combination of 2.25Cr-1Mo (P22) and modified 9Cr-1Mo (P91) obtained using Gas Tungsten Arc Welding (GTAW) process employing the Ni-based superalloy filler ERNiCr-3 (IN82) ERNiCrMo-3 (IN625) have been investigated for microstructure evolution mechanical properties. butt weld joint was produced single bevel groove geometry. structural integrity welded measured in respect tensile st...

The morphological and compositional characterization of the filler particles in selected dental composites has been accomplished by a combination of backscattered elec tron imaging, digital imaging , energy dispersive X-ray analysis and thermogravimetry. Backscattered electron images provide excellent composition contrast between the filler and the matrix in this analysis . Qualitative energy d...

Vol. 28, No. 5, 2016 647 Received July 22, 2015, Revised September 2, 2015, Accepted for publication September 7, 2015 Corresponding author: Hee Young Kang, Department of Dermatology, Ajou University School of Medicine, 164 WorldCup-ro, Yeongtong-gu, Suwon 16499, Korea. Tel: 82-31-219-5190, Fax: 82-31-219-5189, E-mail: [email protected] This is an Open Access article distributed under the terms...

To investigate the relationship between T-DNA integration and double-stranded break (DSB) repair in Arabidopsis, we studied 67 T-DNA/plant DNA junctions and 13 T-DNA/T-DNA junctions derived from transgenic plants. Three different types of T-DNA-associated joining could be distinguished. A minority of T-DNA/plant DNA junctions were joined by a simple ligation-like mechanism, resulting in a junct...

objective: the purpose of the study was to evaluate the influence of adding nanofiller particles to a dentin bonding agent on resin-dentin bond strength. materials and methods: fifty-four human intact premolar teeth were divided in to 6 groups of nine. the teeth were ground on occlusal surfaces and polished with 320 and then 600 grit silicon carbide papers. an experimental bonding system based ...

Soft tissue filler injection has been a very common procedure worldwide since filler injection was first introduced for soft tissue augmentation. Currently, filler is used in various medical fields with satisfactory results, but the number of complications is increasing due to the increased use of filler. The complications after filler injection can occur at any time after the procedure, early ...

This study examined the effects of monomer composition, original filler content, and application of centrifugal force on the resulting filler loading of composites. Either Bis-MPEPP or UDMA was mixed with TEGDMA at a molar ratio of 1 : 1. Silane-treated silica (14-20 wt%) was added to each mixture. After the mixtures were centrifuged and light-polymerized, rate of increase was determined as the...

We investigated single application of pastes containing a surface reaction-type pre-reacted glass-ionomer (S-PRG) filler on enamel demineralization. Human enamel blocks were polished using pastes containing S-PRG filler (0, 5, and 30%) and immersed in demineralizing solution for 5 days with daily change of solutions. The pH measurement and nanoindentation testing was carried out during the imme...