OBJECTIVES Denture base polymers are multiphase polymers made of polymethyl(methacrylate) (PMMA) beads and monomers containing methylmethacrylate and cross-linking agent. The cross-linking agent is typically dimethacrylate but methacrylated dendrimers have been tested. The aim of this study was to investigate the influence of the molecular weight of the PMMA beads on the mechanical properties o...

the effect of impact modifier on creep behavior of wood flour- recycled polypropylene composites has been evaluated in this work. for this purpose, impact modifier (ethylene vinyl acetate) and recycled polypropylene were mixed with wood flour (50/50% w/w) as well as the impact modifier (0, 3%, 6% and 9%) by a counter-rotating twin-screw extruder to manufacture the wood flour- recycled polypropy...

Recently, new generations of nanoceramic composite resin CAD/CAM blocks, have been introduced to dentistry, which are claimed to have higher flexural strength, fracture, fatigue and wear resistance, and beside natural looking appearances can be polished easily. Therefore, the aim of this study was to compare flexural strength of 2 nanoceramic composite resin CAD/CAM blocks (Lava Ultimate and Vi...

PURPOSE This study was designed to assess the mechanical properties of two calcium carbonate tempers, limestone and burnt shell. These tempers have been previously compared, in separate studies, to silicate-based grit or sand temper and, relative to the latter, are assumed to possess similar mechanical properties. However, their simultaneous use at the Morrison Village site begs the question: d...

Aim of this work was to investigate the tensile, flexural and dielectric properties of composites made by reinforcing Sansevieria cylindrica as a new natural fibre into a rubber based polyester matrix. The fibres extracted by retting and manual processes were used to fabricate the composites. These composites were tested for the properties which mentioned above and compared with those of establ...

The choice of the most suitable orthodontic wire for each stage of treatment requires estimation of the forces generated. In theory, the selection of wire sequences should initially utilize a lower flexural rigidity; thus clinicians use smaller round cross-sectional dimension wires to generate lighter forces during the preliminary alignment stage. This assessment is true for conventional alloys...

The purpose of this study was to evaluate the effects of the silane coupling agent amount on the flexural properties and hydrolytic durability on an experimental composite resin for understanding the optimum amount of silanation. A spherical filler was silanated with 7 different amounts of gamma-MPTS, 0, 0.17, 0.34, 0.66, 1.36, 2.72 and 5.45 mass%. Photopolymerized experimental composite resins...

ment methods and two spec/imen diameters. Flexural strength and modulus of woven glass fiber-reinforced specimens werc significanLly greater than those without woven glass fiber (p<O.OD, Likewise, comprossive strength of reinforced specimens was signifieantly greater than those without woven glass fiber (p<O.Ol), except for specimens rcjnforced with woven glass fiber oriented at a tilt directio...

This paper analyzes the usability of different dynamic moduli of elasticity and wood density for the prediction of mechanical properties – static modulus of elasticity and modulus of rupture – in samples with grain deflection from the longitudinal direction. Five tropical hardwoods (Afzelia bipindensis, Intsia bijuga, Millettia laurentii, Astronium graveolens and Microberlinia brazzavillensis) ...