AA 6061 has gathered wide acceptance in the fabrication of the light structures required to high strength. Compared to the fusion welding processes that are used for joining structural aluminium alloys, friction stir welding (FSW) process is an emerging solid state joining process in which the material that is being welded does not melt and recast. In this experimental work, an extensive invest...

Friction stir welding (FSW) is a recently developed solid-state joining process that uses a specially shaped rotating tool to produce lap or butt joints. At the National Research Council, an inter-institute collaboration was started in 2007 with the goal of exploiting the NDE expertise and applying it for the characterization of friction stir welds for various industrial applications. In partic...

To overcome limitations of fusion welding of the AA7050-T7451aluminum alloy friction stir welding (FSW) has become a prominent process which uses a non-consumable FSW tool to weld the two abutting plates of the workpiece. The FSW produces a joint with advantages of high joint strength, lower distortion and absence of metallurgical defects. Process parameters such as tool rotational speed, tool ...

In the present study, Al5083- Al2O3 nanocomposite was successfully prepared by friction stir processing (FSP) with rotational speed of 710 rpm and travel speed of 14 mm/min. In order to improve distribution of Al2O3 particles, a net of holes were designed on the surface of Al5083 sheet. The samples were characterized by optical and scanning electron microscopy (SEM), microhardness, tensile and ...

The dislocation density and subgrain size were determined in the base material and friction-stir welds of 6061-T6 aluminum alloy. High-resolution X-ray diffraction measurement was performed in the base material. The result of the line profile analysis of the X-ray diffraction peak shows that the dislocation density is about 4.5 9 10 m 2 and the subgrain size is about 200 nm. Meanwhile, neutron ...