The stability of the physical properties of various commercially available maxillofacial prosthetic materials was evaluated with the use of an accelerated aging chamber. The tensile strength, maximum percent elongation, shear strength, tear energy, and Shore A hardness were determined before and after accelerated aging. Results indicate that silicone 44210, a RTV rubber, is a promising elastome...

The objective of this study was to evaluate the flexural strength (sigma f) and hardness (H) of direct and indirect composites, testing the hypotheses that direct resin composites produce higher sigma f and H values than indirect composites and that these properties are positively related. Ten bar-shaped specimens (25 mm x 2 mm x 2 mm) were fabricated for each direct [D250 - Filtek Z250 (3M-Esp...

The industrially-important WC-Co composite materials provide a useful, albeit complicated materials system for understanding the combined influences on hardness and strength properties of the constituent WC particle strengths, the particle sizes, their contiguities, and of Co binder hardness and mean free paths, and in total, the volume fraction of constituents. A connection is made here betwee...

in this paper, after collecting the rock samples from eight mines and one high way slope, the tests for determination of dry density, uniaxial compressive strength, tensile strength (brazilian test), elastic modulus, schmidt hammer rebound number have been done on samples. in addition, in order to calculating the mean size of rock grains, quartz content, hardness and abrasivity, a thin sections...

the mechanical properties and microstructural developments of 321 stainless steel during thermomechanicalprocess were investigated. the repetitive cold rolling and subsequent annealing wereconducted to achieve nanocrystalline structure in an aisi 321 stainless steel. heavily cold rolling at−20°c was conducted to form martensite in metastable austenitic steel. the process was followed byannealin...

Aluminium base alloy (Al-Cu-Si) was reinforced with silicon carbide (SiC) particles, in various percentage compositions from 0-20 wt%. Silicon carbide particle size of 20µm was selected. The molten slurry of SiC reinforced base aluminium metal was casted through green and dry sand casting methods and solidification process was carried out under ambient conditions. A selected population...

We evaluated the effect of water storage on fluoride release and mechanical properties of compomer restorative material. Fluoride release was recorded using a specific fluoride electrode. Flexural properties and fracture toughness were measured using a universal testing machine. Vickers hardness was measured using a micro-hardness tester. There was initial burst of fluoride release up to 1 w, w...