The main objective of the research is to compare the accurateness of Artificial Neural Networks (ANN) and Multiple Linear Regressions (MLR) model for Specific Fuel Consumption for pyrolysis oil blended with diesel used in a single cylinder diesel engine. In this study, parameters i. e. Injection Timing, Injection Pressure, Compression Ratio, and Load are taken. Artificial Neural Networks (ANN) ...

Diesel engine emission standards are being more stringent as it gains more publicity in industry and transportation. Hence, designers have to suggest new controlling strategies which result in small amounts of emissions and a reasonable fuel economy. To achieve such a target, multi-objective optimization methodology is a good approach inasmuch as several types of ...

This paper provides a comprehensive review of the technical feasibility of DME-Diesel blend as an alternative fuel for compression-ignition engines for automotive applications. DME is a synthetic fuel produced by the conversion of various feedstocks such as natural gas, coal, oil residues and bio-mass. The compatible properties such as high cetane number and low auto-ignition temperature with s...

A lumped parameter model is developed to study performance of marine diesel engine thermal management system. One dimensional flow equations combined with classical Webie combustion model and Woschni heat transfer model are employed to describe diesel’s flow characteristic. Modeling results of heat release from diesel engine is validated against experimental data. Cooperated with experimental d...

A regenerative organic Rankine cycle (RORC) is modeled and optimized for the use of waste heat recovery from a prime mover (PM). Three PMs including, a diesel engine, a gas engine, and a microturbine are selected in this study. Four refrigerants including isobutane, R123, R134a, and R245fa are selected. The nominal capacity of the PM, PM operating partial load, turbine inlet pressure, condenser...

One of the important problems in reducing of pollutant emission from DI and IDI diesel engines is trade-off  between soot and NOx. Split injection is one of the most powerful tools that makes the chance to shift the trade-off curve closer to origin.  At the present work, the effect of split injection on the combustion process and emissions of a cylinder IDI diesel engine under the specification...

air pollution is one of the major issues about the diesel engines in todays' world. it is a special concern in those areas that have difficulty meeting health-based outdoor air quality standards. natural gas has low emission and resource abundance and also conventional compression ignition engine can be easily converted to a dual fuel mode to use natural gas as main fuel and diesel as pilo...

Transesterified vegetable oils (biodiesel) are promising alternative fuel for diesel engines. Used vegetable oils are disposed from restaurants in large quantities. But higher viscosity restricts their direct use in diesel engines. In this study, used cooking oil was dehydrated and then transesterified using an alkaline catalyst. The combustion, performance and emission characteristics of Used ...

Results of experimental investigations of using a coil-shaped injector for reducing NOx emissions from a diesel engine are presented. The study involved the effects of coil length and its mixing effectiveness and the development of the injector system for after treatment of diesel exhausts. Results indicate that the coil-shaped injector system with the ratios of length, pitch and wire diameter ...

The main objective of this study is to improve the performance and cleaning up of diesel engine's exhaust by fumigating known quantity of methanol and methyl ethyl ketone individually using a custom made Electronic fuel injector controlled by a microprocessor. To control the emission from diesel engine and to improve performance, alternate fuel and in-cylinder control techniques are used. The e...