This study evaluated the effect of air-particle abrasion protocols on the biaxial flexural strength, surface characteristics and phase transformation of zirconia after cyclic loading. Disc-shaped zirconia specimens (Ø: 15mm, thickness: 1.2mm) (N=32) were submitted to one of the air-particle abrasion protocols (n=8 per group): (a) 50μm Al2O3 particles, (b) 110μm Al2O3 particles coated with silic...

Introduction: Low resistance of composite resins to abrasion is a primary concern in the application of these materials for posterior restorations which are prone to high occlusal loads. This study compared the wear resistance of three types of composites. Methods: In this laboratory experiment, five specimens of each of the three types of composites (z250, Heliomolar, Opallis) were prepared...

Accumulative roll-bonding process (ARB) is an important severe plastic deformation technique for production of the ultrafine grained, nanostructured and nanocomposite materials in the form of plates and sheets. In the present work, this process used for manufacturing Al/SiO 2 nanocomposites by using Aluminum 1050 alloy sheets and nano sized SiO 2 particles, at ambient temperature. After 8 cycle...

this paper aims at finding the long term coupled effect of high temperature and constant high relative humidity on the corrosion rehabilitated patches of chloride contaminated steel reinforced concrete. this paper is an extension of previous research in which the authors experimentally corroborated re-corrosion in the repaired reinforced concrete (rc) patches in the form of macro-cells. in prev...

Introduction Aeolian abrasion is the dominant rock weathering mechanism on Mars. Ventifacts, defined as rocks whose shapes or textures have been modified by windblown particles, are the manifestation of this weathering mechanism and are found on Earth and Mars. Studies of ventifacts and related features at the well-traversed Spirit Mars Exploration Rover (MER) landing site provides insight into...

An Fe6AlCoCrNi medium-entropy (MEA) coating was coated on a steel substrate by laser cladding. The micro-structure, crystal structure, phases, and wear properties of the were investigated. mainly composed dendritic face-center cubic (FCC) phase, which showed preferred orientation <2 0 0>, normal to surface, body-center (BCC) phase. MEA exhibited satisfactory rigidity with superior resista...

Highly loaded wear components in applications such as crushers or sieves suffer from combined impact and abrasive wear, the worst case exaggerated by high operation temperatures. Hardfacings based on system FeCrC with hardphase contents are promising candidates for applications. Understanding of influence precipitated carbides carbo-borides impact-abrasive resistance is therefore importance to ...

Original scientific paper The experiment centres on two and three body abrasion in three-phase waste-based composite systems. The composite systems abrasion resistance is defined not only by the physical-mechanical relationships of the separate phases of the composite, but also by the mutual interaction of the phases and on the matrix-filler interface. To describe the composite system abrasion ...

Articular cartilage repair was followed for one year in skeletally mature dogs after destabilisation by anterior cruciate ligament transection of the stifle joint (CT), abrasion of the inferior medial condyle (ABR) to bleeding bone, or anterior cruciate transection followed by chondral abrasion (CT/ABR). ABR animals formed repair cartilage at the abrasion site (ABR and CT/ABR) at six months as ...