Simulation models for unsteady open channel flows have been commercially available for more than 2 decades. Most of these models are now available for personal computers and can be used to study the control of irrigation canals. Studies on automatic control methods and algorithms have been performed on at least half a dozen of the available unsteady-flow simulation models. Although, many of the...

Over the past three years a UK EPSRC research programme has been underway at Heriot-Watt University investigating siphonic roof rainwater systems. This text aims to report the principle 8ndings of the project to date. A brief description of experimental and numerical aims is given. The priming procedure which occurs in an idealised system is documented. The test procedures employed are describe...

Jet action from experimental "berry" aneurysms was evaluated as part of a long-range study of stress-strain-time relations of aneurysmal rupture. It was apparent that free jet action was a potent stress agent upon matter in its path. Calculated velocities of free jets ranged up to 477 cm. per sec. Supplementary observations were made upon jets from glass-model aneurysms, including the jet effec...

The two-phase flow field and the motion of the free surface in an oscillating channel are simulated numerically to assess the methodology for simulating nuclear reacotr thermal hydraulics under seismic conditions. Two numerical methods are compared: one is to model the oscillating channel directly using the moving grid of the Arbitrary Lagrangian-Eulerian method, and the other is to simulate th...

Scaling is an integral component of ecology and earth science. To date, the ability to determine the importance of air – water gas exchange across large spatial scales is hampered partly by our ability to scale the gas transfer velocity and stream hydraulics. Here we report on a metadata analysis of 563 direct gas tracer release experiments that examines scaling laws for the gas transfer veloci...

nowadays distillation is recognized as one of the economical and the most trustable separation methods in chemical, petroleum, gas and petrochemical industries. it is almost used as a first and the most applicable choice in separation methods. in this article the effect of inlet downcomer on the hydrodynamics of industrial sieve tray has been elaborated. the study was carried out by using a 3-d...

The Federal Aviation Administration (FAA) method for sizing small detention and retention basins is a volume-based approach that is sensitive to the release rate. In practice, such a release rate is often approximated by open channel hydraulics or culvert hydraulics. Without a consistent guideline, this practice of approximation can result in significant discrepancy or violation of the volume b...

The effect of variation in thermal conductivity of light water reactor fuel elements on core response during loss-of-coolant accident scenarios is examined. Initially, a simplified numerical analysis is utilized to determine the time scales associated with dissipation of stored energy from the fuel into the coolant once the fission reaction is stopped. The analysis is then followed by full reac...