The force-depth behavior of indentation into fibrillar-structured surfaces such as those consisting of forests of microor nanoscale tubes or rods is a depth-dependent behavior governed by compression, bending, and buckling of the nanotubes. Using a micromechanical model of the indentation process, the effective elastic properties of the constituent tubes or rods as well as the effective propert...

This paper describes a method for evaluating material properties of multi-layered system and functional gradient materials from data obtained from indentation testing. The measurement data collected from the penetration force-depth curves is employed for identifying elastic moduli of thin films and functional gradient materials. An axisymmetric indentation problem is first analyzed on the basis...

Bone fragility is a concern for aged and diseased bone. Measuring bone toughness and understanding fracture properties of the bone are critical for predicting fracture risk associated with age and disease and for preclinical testing of therapies. A reference point indentation technique (BioDent) has recently been developed to determine bone's resistance to fracture in a minimally invasive way b...

the research mainly intends to evaluate performance of strontium aluminum polyphosphate as an eco friendly zinc free anticorrosion pigment in formulation of the protective primer based on epoxy resin. comparing to zinc phosphate, the most effective content of the modified pigment was determined through electrochemical impedance spectroscopy. according to pull-off, the superior sapp incorporated...

Psychophysical tests on human subjects showed that judgments of skin indentation depth made when the fingertip was indented at rates from 0.2 to 16 mm/sec were quite insensitive to changes in indentation velocity. Similar results were obtained on the forearm at indentation velocities of 0.4 to 16 mm/sec. Recordings were made from mechanoreceptors in the monkey's hand that were able to respond o...

introduction: nano-indentation has recently been employed as a powerful tool for determining the mechanical properties of biological tissues on nano and micro scales. a majority of soft biological tissues such as ligaments and tendons exhibit viscoelastic or time-dependent behaviors. the constitutive characterization of soft tissues is among very important subjects in clinical medicine and espe...

thermoplastic honeycombs based on polypropylene are one of the latest types of cores used in sandwich structures. up to now there have been few experimental and modelling studies on the mechanical behaviour of sandwich structures with thermoplastic cores. in this paper, by considering the similar properties of foams and thermoplastic honeycombs, attempts are made to model the static indentation...

Instrumented indentation, also known as depth-sensing indentation or nanoindentation, is increasingly being used to probe the mechanical response of materials from metals and ceramics to polymeric and biological materials. The additional levels of control, sensitivity, and data acquisition offered by instrumented indentation systems have resulted in numerous advances in materials science, parti...

OBJECTIVES To assess the accuracy of the indentation method for stiffness measurements and to estimate the Young's modulus of the vocal fold using this technique. STUDY DESIGN Basic science. METHODS Indentation tests were performed using a range of indenter diameters and indentation depths on single- and double-layer silicone rubber models with various cover-layer thicknesses with known geo...

Plastic deformation of Pd–40Ni–20P bulk metallic glass (BMG) was investigated by instrumented nanoindentation experiments over a broad range of indentation strain rates. At low rates, the load–displacement curves during indentation exhibited numerous serrations or pop-ins, but these serrations became less prominent as the indentation rate was increased. Using the tip velocity during pop-in as a...