In this study, a novel multiscale combined creep strain and creep rupture model is proposed. By comparing to experimental data it was shown that the model provides accurate creep rupture predictions for unidirectional off-axis specimens. The creep strain model provides accurate predictions within the confines of the linear elastic restrictions used in its development. This creep strain and cree...

OBJECTIVES To evaluate the viscoelastic properties of demineralized dentin matrix. Stress-relaxation studies were done on matrices in tension and strain elongation or creep studies were done in both tension and compression. METHODS Mid-coronal dentin disks were prepared from extracted unerupted human third molars. Disks were 0.5 mm thick for stress-relaxation or tensile creep experiments and ...

The scale dependence of the strength of virtually homogeneous rock is usually considered to be insignificant but the spectrum of discontinuities plays a very important role for the strength of differently sized rock elements and also controls the rock creep strain. Large-scale load tests comprised recording of the creep strain rate that was found to be strongly retarded and negligible for stres...

This study tested the hypothesis that late weaning and the availability of creep feed during the suckling period compared with early weaning, improves feed intake, decreases stress and improves the integrity of the intestinal tract. In this study with 160 piglets of 16 litters, late weaning at 7 weeks of age was compared with early weaning at 4 weeks, with or without creep feeding during the su...

The autonomous repair mechanism of creep cavitation during high-temperature deformation has been investigated in Fe-Au and Fe-Au-B-N alloys. Combined electron-microscopy techniques and atom probe tomography reveal how the improved creep properties result from Au precipitation within the creep cavities, preferentially formed on grain boundaries oriented perpendicular to the applied stress. The s...

The present paper will describe an approach for the simultaneous real-time compensation of hysteresis, creep and force-dependence effects of a piezoelectric stack actuator by a feed-forward controller. The basis of the feed-forward controller is given by so-called complex creep and hysteresis operators, which when adequately implemented, lead to a precise model of the creep and hysteresis chara...

The role of cellulose microfibril orientation in determining cell wall mechanical anisotropy and in the control of the wall plastic versus elastic properties was studied in the adaxial epidermis of onion bulb scales using the constant-load (creep) test. The mean or net cellulose orientation in the outer periclinal wall of the epidermis was parallel to the long axis of the cells. In vitro cell w...

The Steady state creep behaviour of a functionally graded cylinder made of isotropic composite containing varying distribution of silicon carbide particles has been investigated by a mathematical model. The creep behaviour of the FGM is described by a Norton's Power law. The effect of varying distribution of SiCP particles of creep stresses and creep rates in the FGM cylinder has been anal...

We present experimental evidence that pressure solution creep does not establish a steady-state interface microstructure as previously thought. Conversely, pressure solution controlled strain and the characteristic length scale of interface microstructures grow as the cubic root of time. Transient creep with the same scaling is known in metallurgy (Andrade creep). The apparent universal scaling...

.............................................................................................................................. iii ACKNOWLEDGMENTS ......................................................................................................... iv TABLE OF CONTENTS ............................................................................................................ v LIST OF FIGU...