The aim of this study was to compare and evaluate strain distribution on dental implant, abutment, screw and crown virtual models in the posterior region. The analysis was performed by means of a 3D virtual model developed by the PRO-ENGINEER System (PRO-ENGINEER, PTC, Needham, MA, USA ) with an external butt joint (3i Implant Innovations, Palm Beach, Florida), square headed Gold Tite abutment ...

The implant-abutment connection of a two-piece dental implant depicts a complex micro-mechanical behavior: a micro-gap is evident at the implant-abutment interface, even in the virgin state. Its width varies when external mechanical load is applied. High resolution synchrotron-based radiography in combination with hard X-ray phase contrast to image this gap and estimate its size is deployed. Th...

This study addresses the design of riprap aprons as a scour countermeasure near abutments under clear-water conditions. It deals with the lateral extent of riprap aprons and the geometry of the scour hole prevailing at the apron edge. The study applies to riprap aprons acting as granular filters. The scour depth appears to be independent for a sufficiently long relative abutment length. Scour h...

To investigate the effects of abutment taper angles on the fracture strength of dental implants with TIS (taper integrated screwed-in) connection. Thirty prototype cylindrical titanium alloy 5.0mm-diameter dental implants with different TIS-connection designs were divided into six groups and tested for their fracture strength, using a universal testing machine. These groups consisted of combina...

PURPOSE This study evaluated the reliability and failure modes of anterior implants with internal-hexagon (IH), external-hexagon (EH), or Morse taper (MT) implant-abutment interface designs. The postulated hypothesis was that the different implant-abutment connections would result in different reliability and failure modes when subjected to step-stress accelerated life testing (SSALT) in water....

This article presents a preliminary clinical evaluation following the placement of 107 dental implants covered with computer-coded healing abutments. The healing abutment system evaluated herein provided information to specific computer software that facilitated the delivery of an anatomical definitive abutment. This system also assisted in the development of a titanium abutment whose character...

After exposing a submerged implant to the oral environment, bone loss occurs downwards along the implant body and stops at some predefined position. A current area of hot debate is the significance of the implant abutment interface and its influence on crestal bone level in relation to the first thread. In recent years, the microgap which exists at the connection between the implant body and th...

An implant-abutment interface at the alveolar bone crest is associated with sustained peri-implant inflammation; however, whether magnitude of inflammation is proportionally dependent upon interface position remains unknown. This study compared the distribution and density of inflammatory cells surrounding implants with a supracrestal, crestal, or subcrestal implant-abutment interface. All impl...

STATEMENT OF PROBLEM Loosening or fracture of the abutment screw are frequent complications in implant dentistry and are detrimental to the long-term success of the restorations. However, little is known about the factors influencing the stability of the screw-abutment complex. PURPOSE The purpose of this study was to investigate the influence of lubricant action during implant assembly on sc...