Anodization techniques by alternating current (ac) are introduced in this review. By using ac anodization, laminated alumina films are fabricated. Different types of alumina films consisting of 50-200 nm layers were obtained by varying both the ac power supply and the electrolyte. The total film thickness increased with an increase in the total charge transferred. The thickness of the individua...

Abstract In this paper a broadband active shunt technique for controlling vibration in piezoelectric laminated structures is proposed. The effect of the negative capacitance controller is studied theoretically and then validated experimentally on a piezoelectric laminated simply supported plate. The ‘negative capacitance controller’ is similar in nature to passive shunt damping techniques, as a...

in this paper, the problem of calculating the stress intensity factor (sif) for an orthotropic thick-walled cylinder with a small radial crack subject to internal pressure is considered. the crack is assumed to be an edge crack on the external radius of the cylinder. the stress intensity factor is calculated by superposition of an uncracked cylinder with uniform stress distribution and a cylind...

It is well known that for laminated composite plates a Levy-type solution exists only for cross-ply and antisymmetric angle-ply laminates. Numerous investigators have used the Levy method to solve the governing equations of various equivalent single-layer plate theories. It is the intension of the present study to introduce a method for analytical solutions of laminated composite plates with ar...

laminar free convection heat transfer from vertical and inclined arrays of horizontal isothermal cylinders in air was investigated experimentally and numerically. experiments were carried out using mach-zehnder interferometer and the fluent code was used for numerical study. investigation was performed for vertical and horizontal cylinder spacing from 2 to 5 and 0 to 2 cylinder diameters respec...

Laminar free convection heat transfer from vertical and inclined arrays of horizontal isothermal cylinders in air was investigated experimentally and numerically. Experiments were carried out using Mach-Zehnder interferometer and the FLUENT code was used for numerical study. Investigation was performed for vertical and horizontal cylinder spacing from 2 to 5 and 0 to 2 cylinder diameters respec...

In this article, free vibration analysis of variable stiffness composite laminate (VSCL) plates with flat and folded shapes is studied. In order to consider the concept of variable stiffness, in each layer of these composite laminated plates, the curvilinear fibers are used instead of straight fibers. The analysis is based on a semi-analytical finite strip method which follows classical laminat...

Numerical computation of wave propagation in laminated cylinders with internal fluid and residual stress is obtained using a Wave Finite Element formulation for 2D waveguides. Only very small segment the system modelled, resulting low-order finite element (FE) model to which theory periodic structures applied. The method uses standard FE formulations exploits capability commercial software both...

the flow characteristics around an elliptic cylinder with an axis ratio of ar=2 located near a flat plate were investigated experimentally. the elliptic cylinder was located on the inside and outside a turbulent boundary layer region whose thickness (δ) is 0.38b. the reynolds numbers based on the height of the cylinder cross-section were 15000 and 30000. measurements of mean velocity and turbul...