the transport properties of liquids and gases through polymeric materialsplay a very important role in some areas of industrial applications. in thisstudy, natural rubber (nr)/caco3 composites were prepared by melt mixingmethod. by equilibrium swelling test, the transport process of toluene in the prepared natural rubber composites was investigated. the diffusion and transport of toluene throug...

The aluminum bronze matrix alumina composites using hot press and resin infiltration were investigated to study their porosities, hardness, bending strengths, and microstructures. The experiment results show that the hardness of the sintered composites with the decrease of porosity increases. The composites without and with resin infiltration have about HRF 42-61 of about 34-40% of porosity and...

Carbide composites are materials based on the carbide phases of the refractory or high melting temperature metals. The hard carbide phase (WC, TiC) is usually embedded into soft matrix – pure metals (Fe, Co, Mo, Ni and others) or their combinations. The hard phase supports high hardness and strength of the carbide composites, while matrix is needed for toughness and plastic properties. The ordi...

Particulate composites with negative stiffness inclusions in a viscoelastic matrix are shown to have higher thermal expansion than that of either constituent and exceeding conventional bounds. It is also shown theoretically that other extreme linear coupled field properties including piezoelectricity and pyroelectricity occur in layerand fiber-type piezoelectric composites, due to negative incl...

In the present study, an attempt has been made to investigate the influence of the forging parameters on cutting forces for different cutting speed, depth of cut, and feed rate during machining of Al 7075 alloy and Al 7075 alloy with short basalt fiber reinforced metal matrix composites. The experiments were conducted by using a lathe machine with tool dynamometer setup. KeywordForging effect, ...

As structural materials, cement-matrix composites have received much attention in terms of their mechanical properties, but relatively little attention in terms of their electrical conduction properties. Nevertheless, the electrical properties are relevant to the use of the structural materials for non-structural purposes such as sensing and electromagnetic interference (EMI) shielding. The abi...

Metal matrix composites (MMCs) exhibit improved strength but suffer from low ductility. Metal particles reinforcement can be an alternative to retain the ductility in MMCs (Bauri and Yadav, 2010; Thakur and Gupta, 2007) [1,2]. However, processing such composites by conventional routes is difficult. The data presented here relates to friction stir processing (FSP) that was used to process metal ...

Recent past decades have witnessed remarkable advances in composites with potential applications in biomedical devices, aerospace, textiles, civil engineering, energy, electronic engineering, and household products. Thermoset polymer composites have further enhanced and broadened the area of applications of composites. In the present work epoxy-BMI toughened-silica hybrid (RHA/DGEBA-BMI) was pr...

metal matrix composites have been widely used in industries, especially aerospace industries, due to their excellent engineering properties. however, it is difficult to machine them because of the hardness and abrasive nature of reinforcement elements like silicon carbide particles (sicp).in the present study, an attempt has been made to investigate the influence of spindle speed (n), feed rate...

Polymer matrix composites can be severely degraded/damaged under thermal loading caused by fire. Fire degradation of fiber composites is a serious concern in large load-bearing structural applications such as ship, piers and bridges. This paper describes results from combined experimental and theoretical studies of compressive failures of polymer-matrix glass-reinforced composites which have un...