We present a continuous manufacturing process for low-cost and scalable production of vertically aligned carbon nanotube (CNT) forests, along with continuous rolling of the CNTs to create horizontally aligned (HA) CNT ribbons and sheets. These methods are capable of producing uniform films over waferscale dimensions and beyond, and the CNTs can be patterned by lithography and plasma etching to ...

An experimental study has been carried out to investigate the behaviour of co-bonded carbon fibre reinforced plastics joints with a novel design incorporating a through the thickness local reinforcement. Different specimens were manufactured to investigate static and fatigue behaviour, as well as delamination size after impact and damage tolerance characteristics. The mechanical performances of...

The characteristics of carbon fibre reinforced laminates have widened their use from aerospace to domestic appliances, and new possibilities for their usage emerge almost daily. In many of the possible applications, the laminates need to be drilled for assembly purposes. It is known that a drilling process that reduces the drill thrust force can decrease the risk of delamination. In this work, ...

-This paper focus on investigating the impact property of laminated composites.The test are performed based onASTM standardsD3029 and D7137.The impact test were carried out using an instrumented drop weight test. The behavior of E-glass/epoxy and carbon fiber laminated composite plates has been experimentally studied under impact of steel projectile at low velocities. The results were obtained ...

OBJECTIVES To present a grading system of the protection offered by various types of mouthguard, together with an indication of associated risks, in order to make athletes aware of the consequences of improper or no mouth protection. METHODS A review of the literature on mouthguards, mouthguard materials, and novel laminates for mouthguards was carried out as it was apparent that information ...

L.K. Grunenfelder and S.R. Nutt 1. Department of Chemical Engineering and Materials Science, University of Southern California, Los Angeles, CA 90089-0241, USA *Corresponding author: [email protected] Abstract: Void formation as a function of resin moisture content was investigated to better understand and control process defects in composite parts made from prepreg. In this study, uncured prepr...

Block copolymers remain one of the most extensively studied and utilized classes of macromolecules due to their extraordinary abilities to (i) self-assemble spontaneously into a wide variety of soft nanostructures and (ii) reduce the interfacial tension between, and thus compatibilize, immiscible polymer pairs. In bilayered thin-film laminates of immiscible homopolymers, block copolymers are si...

Cross-ply laminates reinforced with basalt fibers and functionalized multi-walled carbon nanotubes (MWCNTs) were fabricated from unidirectional epoxy prepregs. MWCNTs with varied surface conditions were prepared by oxidization or esterification, and then dispersed into a DGEBA epoxy system. The dispersion of the MWCNTs in the epoxy was improved by surface modification, resulting in improved com...

Self-healing is receiving an increasing amount of worldwide interest as a method to autonomously address damage in materials. The incorporation of a self-healing capability within fibre-reinforced polymers has been investigated by a number of workers previously. The use of functional repair components stored inside hollow glass fibres (HGF) is one such bioinspired approach being considered. Thi...

In this paper, a method of solution and some numerical resu~s of free vibration and buckling of composite laminates are presented. All the edges of the laminates are assumed as simply supported. Ritz's method of solution is used with deflection surface expressed in terms of double series in Chebyshev polynomials satisfying the simply supported laminate boundary conditions. The numerical results...