Achieving a high number of inter-pore channels and a nanofibrous structure similar to that of the extracellular matrix remains a challenge in the preparation of Bombyx mori silk fibroin (BSF) scaffolds for tissue engineering. In this study, Antheraea pernyi silk fibroin (ASF) micro/nano fibers with an average diameter of 324 nm were fabricated by electrospinning from an 8 wt % ASF solution in h...

a modified model has been analytically developed to describe the induction time of an elliptic air bubble in contact with an elliptic hydrophobic oil droplet. the role of hydrophobicity was revealed in the slippage of liquid over the surfaces of bubble and droplet. in this condition, the analytical relationships for pressure distribution and consequently hydrodynamic resistance force through th...

UNLABELLED Nano-computed tomography (nano-CT) is an emerging, high-resolution cross-sectional imaging technique and represents a technical advancement of the established micro-CT technology. Based on the application of a transmission target X-ray tube, the focal spot size can be decreased down to diameters less than 400 nanometers (nm). Together with specific detectors and examination protocols...

A lot of molecular (magnetic) conductors are prepared largely using charge-transfer (CT) salts of donor molecules with acceptor molecules or nonmagnetic or magnetic anions such as metal halides and oxides; their CT salts are usually obtained as bulk crystals, which are used to elucidate the electrical conducting (magnetic) properties. In contrast, a small number of micro/nano-crystals of the mo...

A Fabry-Perot interferometer sensor based on a fiber-tip bubble-structure micro-cavity is proposed, fabricated, and demonstrated for transverse load sensing. The micro-cavity is fabricated by using arc discharge at the end of a multimode fiber which has been processed with chemical etching. A transverse load sensitivity of 3.64 nm/N and a relative low temperature sensitivity of about 2 pm/◦C ar...

Porous bone tissue engineering scaffolds were fabricated using both nano hydroxyapatite (nano HA) powder (20 nm average particle size) and micro HA powder (10 microm average particle size), resulting in sintered scaffolds of 59 vol% porosity and 8.6 +/- 1.9 microm average grain size and 72 vol% porosity and 588 +/- 55nm average grain size, respectively. Scanning electron microscopy was used to ...

-In storm waterways and at dam outlets, high-velocity supercritical flows are characterized by substantial air bubble entrainment. The entrainment of fine air bubbles and the strong turbulent mixing contribute both to the air-water transfer of volatile gases (e.g. oxygen, nitrogen, VOC). The paper describes new experimental data obtained in a 25 m long channel with a 4 ° slope. The analysis of ...

Air bubbles floating in the bladder dome during transurethral resection of a bladder tumor can interfere with the resection, causing intravesical explosion and increasing the potential risk of tumor cell reimplantation. We describe a simple and effective technique for evacuating air bubbles from the bladder dome using routine resectoscopes. First, the beak of the resectoscope is positioned near...

An energetic micro-initiator through integrating Al/Ni nano-multilayers with Cu film bridge was investigated in this study. The Cu film bridge was initially fabricated with wet etching, and Al/Ni nano-multilayers were alternately deposited on the surface of Cu film bridge by magnetron sputtering. The periodic layer structure of Al/Ni nano-multilayers was verified by scanning electron microscopy...

Soap-bubble-like structured polyacrylic acid (PAA) nano-nets that comprise interlinked ultrathin nanowires with diameters of 10-35 nm are controllably prepared by a one-step electro-netting process.