In this article, a printed triangular-shaped monopole antenna is proposed for emerging ultrawideband application. The proposed antenna uses a triangular radiating patch which is directly fed by a 50-X microstrip feed line. To improve the impedance bandwidth, a round-corner ground plane has been used. To further improve the impedance bandwidth for the entire band, a microstrip transition (near t...

A novel compact circular-polarization (CP) operation of the square microstrip antenna with four slits and a pair of truncated corners is proposed and investigated. Experimental results show that the proposed compact CP design can have an antenna-size reduction of about 36% as compared to the conventional corner-truncated square microstrip antenna at a given operating frequency. Also, the requir...

Microstrip antennas are conformable to planar and nonplanar surfaces, simple and inexpensive to fabricate using modern printed-circuit technology. Circular polarization of low-profile microstrip patch with high bandwidth is achieved in this research through the use of a three-cross-arms branch-line coupler with sequential rotated arrays, another low-profile antenna of hollow cylinder is also pr...

The microstrip antennas area has seen some inventive work in recent years and is now one of the most dynamic fields of antenna theory. A novel and simple wideband monopole antenna is presented printed on a single dielectric substrate which is fed by a 50 ohm microstrip line having a low-profile antenna structure with two parallel s-shaped meandered line of same size. This antenna is fed by a co...

Abstract—A functional microstrip circuit module for annular slot antenna is proposed. This module consists of an annular microstrip line component, two PIN diodes and a DC bias circuit. Reconfigurable circular polarizations can be simply controlled by this functional module. Axial ratio is adjustable by changing the clip angle of the notch made by the annular microstrip line component. Simulate...

---This paper proposes a technique which improves Directivity and control of Beam-Steering by including metamaterial surfaces onto microstrip patch antenna superstrate used for wireless communication applications. Metamaterials are designed with Artificial Magnetic Conductor (AMC), inductive and capacitive planar structures. These structures allow obtaining Partially Reflective Surfaces (PRS). ...

This article proposes, single feed compact slotted patch antenna. It can be seen that bandwidth of Microstrip antenna is increased up to great extant by cutting two equal slots which are same as π structure added with rectangular slots. In some applications in which the increased bandwidth is needed, designed antenna is one of the alternative solutions. The proposed antenna operates in frequenc...

Wireless communication has been developed rapidly in the past decades and it already has a great impact on human life. In the field of wireless communications, antennas play a vitally important role. In the late 1970s, there was rapid development in the field of microstrip patch antenna technology. In early 1980s, antenna elements and arrays were developed in terms of design and modeling. Due t...

Abstract:In telecommunications, there are several types of microstrip antennas, the most common of which is microstrip patch antenna. Patch antennas are also relatively inexpensive to manufacture and design because of simple 2D physical geometry. In this paper Two L slits are introduced at the both edge of the patch to reduce the resonant frequency. The proposed antenna is developed to operate ...

In this paper, we propose an artificial neural network (ANN) as a design technique for multilayer circular microstrip antennas based on Levenberg Marquardt training algorithm for modelling, simulation and optimization. Levenberg – Marquart (LM) algorithm has been used to train the MultiLayer Perceptron Neural Networks (MLPNNs). In the design procedure, the feed forward network is defined as a s...