In this investigation, a combined experimental and computational approach with a Modified Mohr Coulomb (MMC) fracture criterion employing post-initiation element softening is used to simulate stable crack propagation under Mode I, Mode III and combined Mode I/III loading conditions. Results from the studies demonstrate that good correlation exists between the measured load-displacement and the ...

We monitored AEs during micro-indentation and pulse laser spallation test of CVD diamond film deposited on sintered SiC, and classified the fracture type by Lamb wave AE analysis. In the indentation test with a Rockwell sphere indenter, we observed Hertz ring cracks and simultaneously detected AEs from Mode-I fracture. Crack types were classified from polarity distribution of the first arrival ...

To solve crack problems, some coupled methods have been developed in recent years. Most of these methods have some shortcomings such as the need for a transition region. The finite element and enriched element free Galerkin methods are widely used for this class of problems. In order to take the advantages of these methods while avoiding the disadvantages, it is essential to follow solution app...

Compositionally graded glass-filled epoxy sheets with edge cracks initially along the gradient are studied under dynamic loading conditions. Specimens with monotonically varying volume fraction of reinforcement are subjected to mixed-mode loading by eccentric impact relative to the crack plane. The optical method of Coherent Gradient Sensing and high-speed photography are used to map transient ...

Shielding interaction effects of two parallel edge cracks in finite thickness plates subjected to remote tension load is analyzed using a developed finite element analysis program. In the present study, the crack interaction limit is evaluated based on the fitness of service (FFS) code, and focus is given to the weak crack interaction region as the crack interval exceeds the length of cracks (b...

Cracks and craze lines are often observed in the enamel of human teeth, but they rarely cause tooth fracture. The present study evaluates fatigue crack growth in human enamel, and compares that to the fatigue response of sintered hydroxyapatite (HAp) with similar crystallinity, chemistry and density. Miniature inset compact tension (CT) specimens were prepared that embodied a small piece of ena...

A mode-dependent embedded-process-zone (EPZ) model has been developed and used to simulate the mixed-mode fracture of plastically deforming adhesive joints. Mode-I and mode-II fracture parameters obtained from previous work have been combined with a mixed-mode failure criterion to provide quantitative predictions of the deformation and fracture of mixed-mode geometries. These numerical calculat...

In the present research, a fully Automatic crack propagation as one of the most complicated issues in fracture mechanics is studied whether there is an inclusion or no inclusion in the structures. In this study The Extended Finite Element Method (XFEM) is utilized because of several drawbacks in standard finite element method in crack propagation modeling. Estimated Crack paths are obtained by ...

The fracture of restored teeth is a significant obstacle to lifelong oral health. Recent studies suggest that fatigue cracks originate at flaws introduced during cavity preparation and that fatigue crack growth is a principle cause of restored tooth fractures. In this study, the rate of fatigue crack growth in bovine dentin was estimated under mode I cyclic loading. Double cantilever beam (DCB)...

a new approach for analyzing cracked problems in 2d orthotropic materials using the well-known element free galerkin method and orthotropic enrichment functions is proposed. the element free galerkin method is a meshfree method which enables discontinuous problems to be modeled efficiently. in this study, element free galerkin is extrinsically enriched by the recently developed crack-tip orthot...