Anisotropic creep-damage modeling has become an increasingly important prediction technique in both the aerospace and industrial gas turbine industries. The introduction of tensorial damage mechanics formulations in modeling tertiary creep behavior has lead to improved predictions of the creep strain that develops due to anisotropic grain structures and the induced anisotropy that occurs with i...

The classic Kachanov-Rabotnov isotropic creep damage constitutive model has been used in many situations to predict the creep deformation of high temperature components. Typically, the secondary creep behavior is determined by analytical methods; however, the tertiary creep damage constants are found using a mixture of trial and error and numerical optimization. These methods require substantia...

spark plasma sintering (sps) method, as plasma activated sintering, is a method applicable for rapid sintering of metals and ceramics. owing to the advantage of rapid heating, the alumina ceramics obtained by sps have a grain size and density comparable to those of hot pressed ones. the increase of densification rate may be related to some difference in ion transport characteristics. this study...

the influence of flour content and immersion time in water on the creep behavior of composites made from high density polyethylene (hdpe) waste and mdf (medium density fiberboard) flour was investigated. mixing was carried out by a twin screw extruder and the sample was manufactured by flat hot press. firstly, the modulus of elasticity and bending strength of various mdf flour-polyethylene comp...

The purpose of this research was to investigate the creep behaviour of the heterogeneous Timber-UHPFRC beams. New developments have been done to further improve the structural performance, such as strengthening of the timber (glulam) beam by bonding composite material combine with an ultra-high performance fibre reinforced concrete (UHPFRC) internally reinforced with or without carbon fibre rei...

This study evaluates the impact of intermetallic compound (IMC) thickness on thermo-mechanical reliability lead-free SnAgCu solder joints in crystalline silicon solar cell assembly with regard to fatigue life. Finite element modelling is used simulate non-linear deformation joints. Five geometric models assemblies different IMC layers range 1 4 ?m are utilized. The were subjected accelerated th...

Tensile–creep experiments were conducted in the temperature range 100–200 C and stress range 20–83 MPa for a series of magnesium–zinc–yttrium (Mg-Zn-Y) and mangnesium-zinc–zirconium (Mg-ZnZr) alloys ranging from 0 to 5.4 wt% Zn, 0 to 3 wt% Y, and 0 to 0.6 wt.% Zr. The greatest tensile– creep resistance was exhibited by an Mg–4.1Zn–0.2Y alloy. The room-temperature yield strength increased with i...

in this article, the effects of adding zn and conducting age hardening treatment on impression creep properties of mg-5%sn alloy have been investigated. the creep tests were carried out using impression creep method in which a cylindrical punch was used to apply the stress in range of 450 mpa < σimp < 270 mpa and at the test temperatures of 150, 175 and 200 °c. the results showed that age harde...

A new analytical model for the prediction of concrete response under uniaxial compression and its experimental verification is presented in this paper. The proposed approach, referred to as the rheological-dynamical continuum damage model, combines rheological-dynamical analogy and damage mechanics. Within the framework of this approach the key continuum parameters such as the creep coefficient...