At present, thermal storage is considered as one of the key technologies to alleviate problem instability and intermittence for renewable energy. Due relatively high latent heat, heat by molten salt a potential technology. Because restriction different thermophysical parameters, application has many technical obstacles. So, it an urgent work find better mixed formula with comprehensive properti...

This study evaluates exhausted carbon nanotubes regenerated by desorption processes using 1mM NaOH and microwave irradiation processes. Kinetic analyses of re-adsorption were performed using pseudo first- and second-order models. Regression results revealed that a pseudo first-order model accurately captured re-adsorption kinetics. The regeneration efficiency was 28, 30, 35 and 44% at 18, 28, 3...

The introduction of polymerase chain reaction (PCR) into the forensic field has greatly extended the ability to analyze DNA from small or degraded samples. However, one significant problem with PCR analysis is the sensitivity of Taq Polymerase to inhibitors found in many substrates commonly encountered with evidentiary materials. We hypothesize that the most problematic of these compounds inter...

In this work, treatments with a xylanase (X) and carbohydrases mixture (Cx) were applied on a TCF bleached sisal pulp in order to obtain high-cellulose content fibers applicable on a wide range of uses. A limit of ≈12% w/w final content in hemicelluloses was found regardless of the enzymatic treatment assessed. An extraction with 4% and 9% w/v NaOH was performed for further hemicelluloses remov...

The paper presents the effect of different synthesis parameters, such as (a) fly ash to alkaline solution ratio, (b) concentration of NaOH solution, (c) concentration of sodium silicate solution, (d) geopolymer solids to water ratio and (e) sodium silicate to sodium hydroxide solution ratio, on the compressive strength of geopolymer concrete synthesized from fly ash of Indian origin. It is obse...

Canola straw can be used as a raw material for the production of chemimechanical pulp (CMP). In this work, chemimechanical pulp was first produced from canola straw, and then the bleaching performance of the produced chemimechanical pulp was investigated under different conditions (dosages of NaOH and Na2SO3, time, and temperature). The results showed that the yield of chemical pretreatment in ...

Urea-formaldehyde resins modified by melamine were synthesized by four catalysts (H2SO4, HCl, H3PO4, and NaOH/NH4OH) with a F/U/M molar ratio of 1.38/1/0.074. Resin structure and thermal behavior were studied by C-NMR and DSC techniques. For H2SO4, HCl, and H3PO4 catalysts, resins were prepared by two stage pH adjustment: the first pH stage was set at 1.25 (H3PO4 pH 1.60) and second pH stage wa...

Hydrochloric acid (HCl) and caustic (NaOH) are among the most widely used chemicals by the water industry. Direct anodic electrochemical HCl production by water electrolysis has not been successful as current commercially available electrodes are prone to chlorine formation. This study presents an innovative technology simultaneously generating HCl and NaOH from NaCl using a Mn0.84Mo0.16O2.23 o...

To determine the effects of lactic acidemia versus lactate on CBF, we infused lactic acid, either buffered with NaOH (L + NaOH) or with added NaCl (L + NaCl), to attain similar osmolalities in 18 piglets. CBF (microsphere technique), pH, blood gases, plasma osmolality, and cerebral arteriovenous differences of O2 content and lactic acid concentrations were measured prior to, at 30 min of a lact...

Conditions to increase phenolic hydroxyl groups (OH-Phe) in organosolv lignin using alkaline catalysts (NaOH and KOH) were optimized with the purpose of increasing the reactivity of lignin and to evaluate the effect on the structure of the newly generated compounds as a result of the basecatalyzed depolymerization (BCD). The lignin-derived compounds could be used for the synthesis of bio-based ...