We conduct a finite element analysis of the slice compression test [13] applied to metal-matrix composites. This test, designed to characterize interfaces in composite materials, involves pressing a composite material specimen on a soft plate so that fibers are forced to protrude and intrude into the soft plate leaving a permanent deformation. We focus on the Ti-6Al-4V matrix with SCS-6 silicon...

The deflection and fracture of metal sandwich plates subjected to intense uniform impulsive pressure loads are studied for plates made of four steels representing a wide range of strength, strain hardening and ductility. Sandwich plates with both square honeycomb cores and folded plate cores are considered. The primary fracture modes of the sandwich plates are necking and subsequent tearing of ...

Thin-film-based phase-plates are applied to enhance the contrast of weak-phase objects in transmission electron microscopy. In this work, metal-film-based phase-plates are considered to reduce contamination and electrostatic charging, which up to now limit the application of phase-plates fabricated from amorphous C-films. Their crystalline structure requires a model for the simulation of the ef...

In 1992, I was hired by the State of Oregon as an expert witness in a trial of four chiropractors who had been accused of using a "Toftness-like device" in their practices. The "Toftness Radiation Detector" was an appliance designed by a chiropractor for diagnosing ailments. It consisted of a metal cylinder shaped somewhat like a thick soup can. At one end was a lens; at the other was a smooth ...

Background Reverse total shoulder arthroplasty is an increasingly utilized treatment option for glenohumeral arthritis with massive, irreparable rotator cuff disruption associated with loss of glenohumeral stability and function. Several reverse shoulder implant designs from different manufacturers have been introduced to the market in recent years. Fixation of the glenoid base plate has been s...

Abstract: The thermo-elastic fracture problem and equations are established for aluminium alloy Metal Inert Gas (MIG) welding, which include a moving heat source and a thermoelasticity equation with the initial and boundary conditions for a plate structure with a crack. The extended finite element method (XFEM) is implemented to solve the thermo-elastic fracture problem of a plate structure wit...

Recent results on fluid–structure interaction for plates subject to high intensity air shocks are employed to assess the performance of all-metal sandwich plates compared to monolithic solid plates of the same material and mass per area. For a planar shock wave striking the plate, the new results enable the structural analysis to be decoupled from an analysis of shock propagation in the air. Th...

We measured the sounds of smooth metal balls rolling over medium density fiberboard (MDF) plates. In the spectrograms of these sounds we observed gradually varying ripples. These ripples were more closely spaced for the sound generated in the middle of the plate than for the sound generated closer to the edge. Furthermore, the spacing for lower frequencies was somewhat closer than for higher fr...

We describe the properties of guided modes in metallic parallel plate structures with subwavelength corrugation on the surfaces of both conductors, which we refer to as spoof-insulator-spoof (SIS) waveguides, in close analogy to metal-insulator-metal (MIM) waveguides in plasmonics. A dispersion relation for SIS waveguides is derived, and the modes are shown to arise from the coupling of convent...

In recent years, culture-independent methods have been used in preference to traditional isolation techniques for microbial community analysis. However, it is questionable whether uncultured organisms from a given sample are important for determining the impact of anthropogenic stress on indigenous communities. To investigate this, soil samples were taken from a site with patchy metal contamina...