Soil fumigants are used to control a wide variety of soil-borne pests in high-cash-value crops. Application of soil fumigants through drip irrigation systems is receiving increasing attention as a method to improve the uniformity of fumigant application. Little information is available on the emissions and soil distribution of fumigants following subsurface drip application, or the effect of pl...

Selective laser sintering (SLS) has been investigated for the production of bioactive implants and tissue scaffolds using composites of high-density polyethylene (HDPE) reinforced with hydroxyapatite (HA) with the aim of achieving the rapid manufacturing of customized implants. Single-layer and multilayer block specimens made of HA-HDPE composites with 30 and 40 vol % HA were sintered successfu...

The use of the biowaste chicken eggshell (ES) particles as an alternative filler for inorganic calcium carbonate (CC) in polymeric materials was investigated this study. ES and CC were chemically surface treated with stearic acid by dry wet methods. Composites filled high-density polyethylene (HDPE) prepared via melt mixing their thermal-mechanical- flow behavior characterized. FTIR results sho...

An essential characteristic for high performance inherently hydrophobic membranes such as microporous high density polyethylene (HDPE) membranes is to have a hydrophilic surface. In this project, wet chemical functionalization as a facile and effective method was developed to give a hydrophilic property to HDPE membranes using polar functional groups. KClO3, K2Cr2O7 and KMnO4 were selected as o...

the influence of flour content and immersion time in water on the creep behavior of composites made from high density polyethylene (hdpe) waste and mdf (medium density fiberboard) flour was investigated. mixing was carried out by a twin screw extruder and the sample was manufactured by flat hot press. firstly, the modulus of elasticity and bending strength of various mdf flour-polyethylene comp...

The main objective of incorporating natural fibers such as Henequen microfibers (NF) into the High Density Polyethylene (HDPE) polymer matrix is to reduce the cost and to enhance the mechanical as well as other properties. The Henequen microfibers were chopped manually to 5-7mm in length and added into the polymer matrix at the optimized concentration of 8 wt %. In order to facilitate the link ...

The thermal and photooxidative behaviour of polyethylenes of different manufacturing histories (linear low, metallocene and high density) have been investigated by FTIR spectroscopy and the data related to the chemiluminescence (CL) and thermal analysis of the polymers. The CL intensity and activation energies for thermal decomposition were found to be dependent on the rates of oxidation of the...

The demand for new, thermally conducting light weight and anti-corrosive materials is tried by incorporating Copper Oxide (CuO) nano powder in polyethylene matrix material. A laboratory level electro deposition technique is adopted here to prepare Copper Oxide (CuO) nano particles. Their phase composition is confirmed with X-Ray diffraction peaks and verified with standard JCPDS file for Copper...

The focus of this research work is to study the effect hybrid fillers bamboo fiber and commercial glass on high density polyethylene (HDPE) matrix without interfacial coupling agent. composite was formed through melt blending method using two-roll mixing mill at temperature 160 oC shaped compression molding machine. highest value Tensile Modulus break Hardness were obtained ratio 70 % HDPE/ 15 ...

This life cycle design (LCD) project was a collaborative effort between the National Pollution Prevention Center at the University of Michigan, General Motors (GM), and the U.S. Environmental Protection Agency (EPA). The primary objective of this project was to apply life cycle design tools to guide the improvement of fuel tank systems. Two alternative fuel tank systems used in a 1996 GM vehicl...