This work presents new results on using organoclay with an appropriate polymeric compatibilizer as rheology-modifying additives for extrusion foaming of a linear polypropylene (PP), which by itself does not display strain hardening in extensional flow of the melt. The uniaxial melt-extensional viscosity behavior of several nanocomposites prepared with varying ratio of bound maleic anhydride to ...

nowadays, nanoscale innovations in the forms of pathogen detection, active packaging, antimicrobial packaging and barrier formation are poised to elevate food packaging to new heights. antimicrobial nanocomposite ldpe films containing zno nanoparticles at different concentrations (e.g. 1%, 3%, 5%  and 3%  nano-zno pulse 10% polyethylene grafted maleic anhydride (pe-g-ma), w/w pure ldpe), were p...

The polycondensation of tetrahydrofuran with maleic anhydride catalyzed by Maghnite-H+ (Mag-H) was investigated. Maghnite is a montmorillonite sheet silicate clay that is exchanged with protons to produce Maghnite-H [1]. It was found that the polymerization in bulk is initiated by Mag-H in the presence of acetic anhydride at 40 degrees C. The effects of the amounts of Mag-H and acetic anhydride...

Nowadays, nanoscale innovations in the forms of pathogen detection, active packaging, antimicrobial packaging and barrier formation are poised to elevate food packaging to new heights. Antimicrobial nanocomposite LDPE films containing ZnO nanoparticles at different concentrations (e.g. 1%, 3%, 5%  and 3%  nano-ZnO pulse 10% polyethylene grafted maleic anhydride (PE-g-MA), w/w pure LDPE), were p...

PLLA-g-LMWNR (LMWNR – low molecular weight natural rubber) was used as a compatibilizer (1–3 wt %) of poly(L-lactic acid)/deproteinized rubber (PLLA/DPNR) blend (95/5 w/w). The LMWNR prepared using TiO2/ZnO (9 : 1 w/w) and H2O2 co-catalyst. obtained grafted with 0–12 % maleic anhydride (LMWNR-g-MA) then PLLA (PLLA-g-LMWNR). A significant improvement in the mechanical properties PLLA/DPNR found ...

Using Electrostatic Spray Coating Technique, Polypropylene Powder (EPD 60R) was applied on carbon steel substrates at room temperature. In order to obtain a uniform coating, steel substrates with powder coatings were heated in a vacuum oven at various temperatures up to 250° C for various periods of time up to 45 min and a pressure of 200 mb. The coatings produced had thicknesses of around 470 ...

In this research, high oxygen-barrier films were organized based on low-density polyethylene (LDPE)/ ethylene vinyl alcohol (EVOH)/ polyethylene-grafted maleic anhydride (LDPE-g-MA) compatibilizer. The effects of 10–30 wt. % EVOH and 0–10 wt. % LDPE-g-MA loadings on the properties of final films were evaluated. The morphology of specimens was observed by using scanning electron microscopy (SEM)...