The torque resistance of zirconia ceramic heads/titanium taper trunnion junctions was tested in accordance with ISO 7206-9:1994(E); using twelve modified heads of 32 mm diameter under representative physiological conditions. Test parameters studied included assembly force, vertical load during test (test load) and head length. Mean torque resistances measured were 8.9 N m for a 1 kN test load a...

A fully integrated single-ended output pushpush oscillator is realized using an advanced 0.2μm SiGe HBT process. Up to –5 dBm output power is achieved at 180 GHz using a technology with a transition frequency fT of 200 GHz and maximum oscillation frequency fMAX of 275 GHz. Preliminary phase noise measurements show a phase noise of less than –90 dBc/Hz at 1 MHz offset from the 180 GHz carrier.

Abstract: A modified large thrust ultrasonic linear motor using a T-shape configuration composed of two orthogonal sandwich-type transducers has been proposed in this paper. It is an improved version of a previous T-shape motor. The vertical transducer is used to generate the normal force between the driving foot and slider, while the other push-pull–type horizontal transducer is applied to gen...

The primary purpose of this study was to compare static and dynamic optimization muscle force and work predictions during the push phase of wheelchair propulsion. A secondary purpose was to compare the differences in predicted shoulder and elbow kinetics and kinematics and handrim forces. The forward dynamics simulation minimized differences between simulated and experimental data (obtained fro...

A cadaver study aims to determine the mechanisms of medial pedicle wall violation after a correct cannulation of the pedicle. The study presents finding out the effect of insertion angle and insertion force on medial wall violation. We used 100 lumbar pedicles of cadavers. Special wooden blocks were produced to simulate a fixed angle fault after a correct pedicle cannulation. Pedicles were divi...

The main objective of this study is to propose the Strut-and-Tie method (STM) to predict the shear capacity of simply supported RC deep beams shear-strengthened with carbon fiber reinforced polymers (CFRP). It is assumed that, the total carried shear force by shear-strengthened RC deep beam provided by three independent resistance, namely diagonal concrete strut due to Strut-and-tie mechanism, ...

The objective of this study was to investigate potential associations between an individual's psychophysical maximum acceptable force (MAF) during pushing tasks and biomechanical tissue loads within the lumbar spine. Ten subjects (eight males, two females) pushed a cart with an unknown weight at one push every two minute for a distance of 3.9 m. Two independent variables were investigated, cart...

on the verge of the constitutionalist revolution in iran, the three social forces existing in the socio-political arena were competing with each other and at the same time, struggling with the monarchy to increase their share of power: independent intellectuals, traditional followers of religion, and merchants. this rivalry set the scene for a discursive battle in which, each social force was t...