The aim of this research is to study the role of nanocrystalline TiO2/SnO2 n-n heterojunctions for hydrogen sensing. Nanopowders of pure SnO2, 90 mol % SnO2/10 mol % TiO2, 10 mol % SnO2/90 mol % TiO2 and pure TiO2 have been obtained using flame spray synthesis (FSS). The samples have been characterized by BET, XRD, SEM, HR-TEM, Mössbauer effect and impedance spectroscopy. Gas-sensing experiment...

A novel binder-free graphene - carbon nanotubes - SnO2 (GCNT-SnO2) aerogel with vertically aligned pores was prepared via a simple and efficient directional freezing method. SnO2 octahedrons exposed of {221} high energy facets were uniformly distributed and tightly anchored on multidimensional graphene/carbon nanotube (GCNT) composites. Vertically aligned pores can effectively prevent the emers...

Single crystalline SnO2 nanocrystals (~60 nm in size) with a uniform octahedral shape were synthesised using a hydrothermal method. Their phase and morphology were characterized by XRD and FESEM observation. TEM and HRTEM analyses identified that SnO2 octahedral nanocrystals grow along the [001] direction, consisting of dominantly exposed {221} high energy facets. When applied as anode material...

With the objective of developing new advanced composite materials that can be used as anodes for lithium ion batteries (LIBs), herein we describe the synthesis of SnO2 pillared carbon using various alkylamine (hexylamine; dodecylamine and octadecylamine) grafted graphene oxides and butyl trichlorotin precursors followed by its calcination at 500 °C for 2 h. While the grafted alkylamine induces ...

Macroporous SnO2 (mp-SnO2(P-n); P means polymethylmethacrylate (PMMA) and n = diameter of PMMA microsphere) thick film gas sensors were fabricated by a modified sol-gel method by employing PMMA microspheres (n = 800, 400, 250 and 150 nm) as a template and SnCl2 as a tin source. Morphology of mp-SnO2 films was markedly dependent on the SnCl2 concentration and the diameter of PMMA microspheres. E...

SnO2 nanoparticles were dispersed on graphene nanosheets through a solvothermal approach using ethylene glycol as the solvent. The uniform distribution of SnO2 nanoparticles on graphene nanosheets has been confirmed by scanning electron microscopy and transmission electron microscopy. The particle size of SnO2 was determined to be around 5 nm. The as-synthesized SnO2/graphene nanocomposite exhi...

Chestnut-like SnO2 and SnO2/C nanocomposites with hierarchical structures are synthesized by hydrothermally oxidizing Sn nanoparticles in glucose solution. Structural characterizations using SEM and TEM reveal that the SnO2 nanoparticles are composed of numerous, randomly arranged SnO2 nanosheets with hollow cores. Owing to the short electron and ion diffusion distances and transformation strai...

Porous TiO2 films were prepared by the micro-arc oxidation (MAO) of Ti plates, and their CO sensing properties at low concentrations (5–100 ppm) were investigated as an application for an air quality control sensor. The obtained rutile films exhibited the maximum CO gas response at 350 ◦C, which is typical for semiconductor-type gas sensors, and the Ra/Rg was ∼1.6 for 10 ppm CO (Ra: resistance ...

Micro-electronic gas sensor devices were developed for the detection of carbon monoxide (CO), nitrogen oxides (NOx), ammonia (NH3), and formaldehyde (HCHO), as well binary mixed-gas systems. Four sensing materials different target gases, Pd-SnO2 CO, In2O3 NOx, Ru-WO3 NH3, SnO2-ZnO HCHO, synthesized using a sol-gel method, then fabricated micro platform. The behavior response to mixture examined...

In this paper, hierarchical Ag-decorated SnO2 microspheres were synthesized by a facile one-pot hydrothermal method. The resulting composites were characterized by XRD, SEM, TEM, XPS, BET, and FTIR analysis. The catalytic performances of the samples were evaluated with the reduction of 4-nitrophenol to 4-aminophenol by potassium borohydride (KBH4) as a model reaction. Time-dependent experiments...