heat exchangers are one of the most important devices of mechanical systems in modernsociety. most industrial processes involve the transfer of heat and more often they requirethe heat transfer process to be controlled. a heat exchanger is the heat exchanged betweentwo media, one being cold and the other being hot. there are different types of heatexchanger, but the type which is widely used in...

if an air flow is injected into a liquid fluid, many ambulant air bubbles are formed inside the fluid. air bubbles move inside the liquid fluid because of the buoyancy force, and the mobility of these air bubbles makes sizable commixture and turbulence inside the fluid. this mechanism was employed to enhance the heat transfer rate of a horizontal double pipe heat exchanger in this paper. howeve...

A mathematical analysis of the heat transfer enhancement, thermal performance and flow configurations in a heat exchanger square duct with diagonal inserted plate vortex generators is presented. The 30o V–shaped baffles are modified and placed on the double sides of the thin plate or frame (with no plate) which inserted diagonally in the square duct. The effects of blockage ratio (b/H, BR), the...

This paper describes a lithography-based microfabrication process developed for a recuperative heat exchanger intended for use in a cryosurgical probe. The probe, which uses the Joule-Thomson (JT) cooling cycle, must achieve a temperature < -50°C, with a freeze rate of 25-50°C/min. The heat exchanger must maintain high stream-to-stream thermal conductance while restricting parasitic stream-wise...

A shell and tube heat exchanger is a class of heat exchanger designs seen most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. As its name implies, this type of heat exchanger consists of a shell (a large pressure vessel) with a bundle of tubes inside it. One fluid runs through the tubes, and another fluid flows...

The primary goal of this work is to use CFD assessment simulating framework anticipate the impact injecting air flowing mal-distribution on heat exchanger architecture and thermal flow characteristics. Using (computational fluid dynamics) simulation-studies, determine intake unequal distribution or complete redesign as well high - temperature hydraulic performing ability HEX (heat exchangers). ...

many studies are performed by researchers about shell and tube heat exchanger but the multi-objective big bang-big crunch algorithm (mobba) technique has never been used in such studies. this paper presents application of thermal-economic multi-objective optimization of shell and tube heat exchanger using mobba. for optimal design of a shell and tube heat exchanger, it was first thermally model...

This report presents UCB progress in developing a comprehensive thermal and fluid dynamics model for the NGNP intermediate heat exchanger (IHX) and other compact heat exchangers. For nuclear hydrogen applications, an IHX is required to transfer heat from high temperature and high-pressure primary helium coolant to a hydrogen production process. An intermediate heat transfer loop is used for the...

Abstract To verify the operational feasibility of plate-and-tube evaporative cooling frost-free heat pump exchanger and its influence factors, a single was selected as simulation object, VOF model, RNG k-ε self-programmed UDF program were used to control water vapor transfer mass air flow rate on internal law model. The results show that velocity increases, percentage turbulent inside model sol...