The prediction of fatigue life of metal welded joints plays an important role at lower manufacturing costs and reduces accidents for engineering materials, the response of metal welded joints to fatigue properties has highly non-linear, so it is difficult to establish an accurate theoretical model using traditional method to predict its fatigue life. It is appropriate to consider modeling metho...

The objective of this study was to investigate the joint properties between cast gold alloys and Co-Cr alloy laser-welded by Nd:YAG laser. Cast plates were fabricated from three types of gold alloys (Type IV, Type II and low-gold) and a Co-Cr alloy. Each gold alloy was laser-welded to Co-Cr using a dental laser-welding machine. Homogeneously-welded and non-welded control specimens were also pre...

Very often, in order to optimized welded constructions, some of their parts are made of heterogeneous steels. For example, microalloyed steels are in use for cars chassis making and high alloyed steels for different constructions making. From that reason, it’s not rare to find welded joints between ferrite microalloyed and austenitic highalloyed steels. As a rule, these joints are welded by usi...

On a two-dimensional cake, there are m pairwise-disjoint toppings. It is required to cut the cake to m + b pieces, such that each topping is entirely contained in a unique piece, and the total number of empty pieces (b, ”blanks”) is minimized. The minimal number of blanks naturally depends on the geometric constraints of the cake and its pieces. I present tight bounds on the number of blanks wh...

Braided wire stents demonstrate distinct characteristics compared to welded ones. In this study, both braided and welded wire stents with the same nominal dimensions were crimped inside a sheath and then deployed into a stenosed artery using finite element analysis. The braided wire stent was generated by overlapping wires to form crisscross shape. A welded wire stent was created by welding the...

In the present paper the effects of the thermal and mechanical actions on the residual stress field occurring in friction stir welding (FSW) of AA7075-T6 were investigated. Both numerical and experimental analyses were carried out to highlight the metallurgical phenomena and induced residual stresses in FS welded blanks. The welding process was simulated using a continuous rigid-viscoplastic fi...

A finite element scheme for simulation of welding residual stresses is presented in this paper. Detailed thermal and residual stress analyses for butt-welded and socket-welded pipes are performed using ANSYS and ABAQUS. The calculated distribution of axial stress and hoop stress at welded joint are validated against experimental results. Furthermore, residual stress relaxation under high amplit...

Lasers are now being used in the automotive industry to produce seam or stitch welds, as alternatives to conventional resistance spot welding, which are used extensively for attaching auto-body panels to subassemblies. The advantages of laser welding over resistance spot welding result from the smallness of the laser spot size, the large penetration depth of the weld into the material and the r...

This study represents simulation of single spot and multi spot welded specimen by using Monte carol method i.e. Latin hypercube sampling. A three dimensional nonlinear finite element analysis of multi-spot welded lap shear specimen is performed and uncertainty in shear strength of spot weld is analyzed. Thickness and nugget radius are randomly varied within effective range and their effect on t...