During the last couple of years several ink manufacturers have presented metal nano-particle inks for inkjet printing. These inks provide low resistances on plastic and paper substrates, thus enabling manufacturing of high-conductivity conductors that could be used in circuit boards. Inkjet printing of a commercial silver nano-particle ink on paper and plastic substrates has been investigated. ...

Hierarchical micro-/nano-structures made easy. By using extremely rough, chemically etched microstructured aluminium foils, anodization in phosphoric acid under very harsh conditions, e.g., 10 wt% phosphoric acid and room temperature, can be repeatedly accomplished without suffering from breakdown. As a result, an alumina membrane with a three-dimensionally distributed nanopore structure is for...

A novel device structure is developed, which uses easy-to-grow nano scaffold films to localize oxygen vacancies at vertical heterointerfaces. The strategy is to design vertical interfaces using two structurally incompatible oxides, which are likely to generate a high-concentration oxygen vacancy. Non-linear electroresistance at room temperature is demonstrated using these nano scaffold devices....

in this research, the effect of different biopolymers such as polyethylene glycol (peg) and polyvinylalcohol (pva) on synthesis and characterization of polymer/cobalt ferrite (cf) nano-composites bymechanical alloying method has been systematically investigated. the structural, morphological andmagnetic properties changes during mechanical milling were investigated by x-ray diffraction (xrd),fo...

With a projection of nearly doubling up the world population by 2050, we need wide variety of renewable and clean energy sources to meet the increased energy demand. Solar energy is considered as the leading promising alternate energy source with the pertinent challenge of off sunshine period and uneven worldwide distribution of usable sun light. Although thermoelectricity is considered as a re...

Polylactide (PLA)/nano-TiO₂ and PLA/nano-TiO₂/nano-Ag blends films were prepared by a solvent volatilization method. Compared to pure PLA film, the nano-blend films have low water vapor permeability (WVP) and a poor transparency. With the increase of the NPs in the PLA, the tensile strength (TS) and elastic modulus (EM) decreased, while the elongation at break (ε) increased. SEM analysis indica...

MgO is an important inorganic material, which can be used in many aspects, such as catalyst, toxic-waste remediation agent, adsorbent, and others. In order to make use of MgO, nano-MgO was prepared by ultrasonic method using Mg (CH3COO)2.2H2O as precursor, NaOH aqueous solution as precipitant in this paper. Effect factors on MgO nano-particle size were investigated. Characteristics of samples w...

Antimicrobial active films based on poly (lactic acid) (PLA) were prepared with nano-silver (nano-Ag) and nano-zinc oxide (nano-ZnO) using a solvent volatilizing method. The films were characterized for mechanical, structural, thermal, physical and antimicrobial properties. Scanning electron microscopy (SEM) images characterized the fracture morphology of the films with different contents of na...

A nano-composite powder composed of silica and carbon with a unique property could be prepared from a mixture of a silicate compound and an epoxy compound, in which the silica within the nano-composite powder has a BET surface area of as high as greater than 800m2/g although the nano-composite powder has a BET surface area of less than 10m2/g. It was estimated that the silica and the carbon are...

We present a novel method to fabricate complete and highly oriented anodic titanium oxide (ATO) nano-porous structures with uniform and parallel nanochannels. ATO nano-porous structures are fabricated by anodizing a Ti-foil in two different organic viscous electrolytes at room temperature using a two-step anodizing method. TiO2 nanotubes covered with a few nanometer thin nano-porous layer is pr...