BACKGROUND Poor mechanical properties are among the main limitations of acrylic resins. Addition of titanium dioxide (TiO2) nanoparticles to acrylic resin has been shown to improve its mechanical properties with an adverse effect on its color. Thus, this study sought to assess the tensile and impact strength of a color modified heat cure acrylic resin reinforced with TiO2 nanoparticles. MATER...

Ag-TiO2@polyethylene glycol (PEG) nanoparticles were continuously obtained in a single-pass configuration by appropriately reacting freshly flame-synthesized TiO2 with Ag formed in an ultrasonic aqueous medium containing PEG. When the proposed synthesis was kept constant, the production rate for Ag-TiO2@PEG nanoparticles reached approximately 3 g/h while only using a combination of a lab-scale ...

Au, Cu and bimetallic Au-Cu nanoparticles were synthesized on the surface of commercial TiO2 compounds (P25) by reduction of the metal precursors with tetrakis (hydroxymethyl) phosphonium chloride (THPC) (0.5 % in weight). The alloyed structure of Au-Cu NPs was confirmed by HAADF-STEM, EDS, HRTEM and XPS techniques. The photocatalytic properties of the modified TiO2 have been studied for phenol...

Bioavailability of engineered metal nanoparticles affects uptake in plants, impacts on ecosystems, and phytoremediation. We studied uptake and translocation of Ti in plants when the main source of this metal was TiO2 nanoparticles. Two crops (Phaseolus vulgaris (bean) and Triticum aestivum (wheat)), a wetland species (Rumex crispus, curly dock), and the floating aquatic plant (Elodea canadensis...

Currently, TiO2 on a fluorine-doped tin oxide substrate is the most commonly used type of photoelectrode in high-efficiency quantum dot-sensitized solar cells (QDSSCs). The power conversion efficiency (PCE) of TiO2 photoelectrodes is limited because of higher charge recombination and lower QD loading on the TiO2 film. This article describes the effect of a TiO2 compact layer on a TiO2 film to e...

nano-sized titanium dioxide tio2 powder was successfully prepared from its precursor titanium (iv) chloride by a simple and new wet chemical method. ticl4 were used as precursor in hydrogen peroxide, h2o2 and ethanol. this solution was then peptized using nitric acid and heated under reflux at 80°c. their physico-chemical properties were then characterized by transmission electron microscopy (t...

CeO2 /TiO2 nanobelt heterostructures are synthesized via a cost-effective hydrothermal method. The as-prepared nanocomposites consist of CeO2 nanoparticles assembled on the rough surface of TiO2 nanobelts. In comparison with P25 TiO2 colloids, surface-coarsened TiO2 nanobelts, and CeO2 nanoparticles, the CeO2 /TiO2 nanobelt heterostructures exhibit a markedly enhanced photocatalytic activity in...

A green and simple biomineralization-inspired method to create "net"-like interconnected TiO2 nanoparticles conformably covering reduced graphene oxide (RGO) with high loading density is reported. This method uses polyamine as both the biomineralization agent and linker to manipulate the nucleation, growth, and crystallization of TiO2 nanoparticles on the surface of graphene oxide. The obtained...

Direct evidence of plasmon-enhanced H2 generation is observed in photocatalytic water reduction by using TiO2 electrospun nanofibers co-decorated with Au and Pt nanoparticles through dual-beam irradiation. The Au/Pt/TiO2 nanofibers exhibit certain activity for H2 generation under single irradiation at 420 nm that excites the defect/impurity states of TiO2. Significantly, when secondary irradiat...

nanosized tio2 particles were prepared by sol–gel method. the tio2 particles were co-deposited with chromium using electrodeposition technique. in investigating of coating surfaces by scanning electron microscope (sem), the results showed that the morphology of the coating surface was changed by adding tio2 nanoparticles to the chromium coating. the corrosion behavior of the coatings was assess...