While a new tire may have excellent resistance to crack initiation and propagation between the steel belts, an aged tire of the exact same construction can exhibit dramatically reduced crack growth resistance, which in some cases may contribute to tire failure. This article will review the research that has gone into quantifying the rate of oxidation the steel belt rubber oxidizes in different ...

Accurate determination of vehicle’s lateral behavior is necessary in the domain of vehicle dynamics and more particularly in the context of improvement of vehicle safety. Thus, a cutting-edge knowledge of its interaction with the road surface is primordial. In consequence, the integration of a force model, representing the tire/ground interface, into the global vehicle model is needed. The vali...

In this study, a low degree-of-freedom mechanical model of a rolling tire is constructed, in which the lateral deformation of the contact patch and tire carcass is considered. The so-called delayed contact patch model is implemented and combined with a simple tire carcass model. The interaction between the contact patch and the carcass together with the lateral mode of the attached suspension s...

The stability analysis of articulated frame steer vehicle models is presented. To reveal the relationship between the “oversteer” and “jack-knife” motion modes based on a 2 degree of freedom (DOF) and 3 DOF vehicle models, respectively, the results derived from these models are investigated and compared. To identify the effects of design variables on the lateral stability of the vehicle, a more...

Often when vehicles interact with roadside hardware like guardrails, bridge rails and curbs, the interaction between the roadside hardware and the tire causes the tire to lose its air seal and "blow-out". Once the seal between the rim and rubber tire is lost, the tire deflates. The behavior of the deflated tire is much different than the behavior of an inflated tire such that when this behavior...

The purpose of this study was to develop a simple approach to evaluate resistive frictional forces acting on manual wheelchairs (MWCs) during straight and turning maneuvers. Using a dummy-occupied MWC, decelerations were measured via axle-mounted encoders during a coast-down protocol that included straight trajectories and fixed-wheel turns. Eight coast-down trials were conducted to test repeat...

To study the method of reducing low-frequency vibration noise tire, a passenger car tire(205/55R16) is taken as research object. The dynamic grounding characteristics and reduction mechanism cat's paw pad are analyzed. showed that swing deformation pads during walking process cats one main ways to reduce impact from ground achieve silencing. analyze influence tire on noise, divided into five ar...

Tire dust is a significant pollutant, especially as a source of zinc in the urban environment. This study characterizes the morphology and chemical composition of heavy metal particles embedded in tire dust and traffic-related materials (brake dust, yellow paint, and tire tread) as measured by a field emission scanning electron microscope equipped with an energy dispersive X-ray spectrometer (F...