This paper reports the effect of superficial liquid mass flow rate and bed void fraction on the pressure drop, dynamic liquid hold-up, mean liquid residence time and biofilm wetting, in a co-current down-flow xylene-removing trickle bed air biofilter (TBAB). The gas–liquid pressure drop increased with liquid mass flow rate and it also increased with diminishing bed void fraction, the effect bei...

dispersive liquid-liquid microextraction method (dllme) combined with high-performance liquid chromatography-ultraviolet detection (hplc-uv) was used to determine thiamine (b1), nicotinamide (b3) and pyridoxine (b6) in sour cherry juice. this method was rapid, simple and sensitive. separation was accomplished using a c18 column. the optimum chromatographic conditions were found to be: mobile ph...

in this study, we combined ionic liquid-based dispersive liquid liquid micro extraction (il-dllme) with faas for determining the palladium in different real samples at the trace level. 1-hexyl-3-methylimidazolium hexafluorophosphate [hmim][pf6] ionic liquid and 1-(2-pyridylazo) 2-naphthol (pan), were chosen as the extraction solvent and the chelating agent, respectively. the hydrophobic pd–pan ...

Liquid films are important in many industrial applications, but also from a fundamental point of view, they are important two-phase flow systems. In this paper, we develop a sharp interface/level set method for the Direct Numerical Simulation (DNS) of liquid films with large interfacial deformations, and large density ratio between the liquid and the gas phase. We use the ghost fluid method to ...

A model for simulating vertical water level fluctuations with coupled liquid and gas phases is presented. The Preissmann implicit scheme is used to linearize the governing equations for one-dimensional transient flow for both liquid and gas phases, and the linear system is solved using the chasing method. Some classical cases for single liquid and gas phase transients in pipelines and networks ...

The problems of steady film condensation on a vertical surface embedded in a thin porous medium with anisotropic permeability filled with pure saturated vapour are studied analytically by using the Brinkman-Darcy flow model. The principal axes of anisotropic permeability are oriented in a direction that non-coincident with the gravity force. On the basis of the flow permeability tensor due to t...

Analysis of the drilling fluid temperature due to heat transfer of drilling fluid with the formation in under-balanced drilling operation is the main objective of this study. Gas-liquid two-phase flow model considering thermal interaction with the formation is used to numerically simulate a well with real dimensions. In the present study, the continuity, momentum, and energy equations are devel...

This paper is concerned with semi-batch foams generated by injecting gas bubbles in a vertical column containing a liquid phase at rest. Its aim is to better understand the physical mechanisms responsible for foam formation at the liquid free surface and to predict the superficial gas velocity for onset of foaming. The model for predicting the onset of foaming is derived from the one-dimensiona...

Buoyancy-driven convective flows are numerically analyzed in a cubic enclosure, containing a liquid subjected to a temperature difference between opposite lateral walls; all other walls are thermally insulated. The stationary gravity vector is perpendicular to the applied temperature gradient. The steady flow patterns are investigated within the framework of a liquid particles tracing technique...

background and objectives: furfural (f) and hydroxymethyl furfural (hmf) are cyclic aldehydes, which are formed during the heat processing of foods. these chemical contaminants have received much attention due to their suspected health hazards and heat damage indicators. the aim of the present study was extraction and determination of f and hmf in baby-foods using dispersive liquid-liquid micro...