With the increasing power demand, voltage fluctuations are to be controlled for a reliable and stable power system. On the same way voltage fluctuations create reactive power mismatch in the system. To overcome these conditions we have to perform reactive power optimisation that would balance the reactive power flow of the system. There are several methods and algorithms that serve best for thi...

A piecewise-linear bandagp reference (BGR) with high power supply rejection ratio (PSRR) and low temperature coefficient is designed for analogue and mixed signal systems in this paper. By adopting LDO regulator, the designed high PSRR piecewise-linear BGR achieves well performances and has a simple architecture. Simulation results show that the PSRR of the designed piecewise-linear BGR with LD...

In the present paper a simple sensorless spccd estimation scheme is presented , where the speed information is obtained from the motor phase current ripple. The scheme measures the stator current phasor deviation direction to determine the back emf vector position during inverter zero vector switching states. This measurcment of rotor flux position is done indirectly by computing the motor back...

Presented is a single-ended potentiostat topology with a new interface connection between sensor electrodes and potentiostat circuit to avoid deviation of cell voltage and linearly convert the cell current into voltage signal. Additionally, due to the increased harmonic distortion quantity when detecting low-level sensor current, the performance of potentiostat linearity which causes the detect...

M. Nagaraju, M. Naresh and S. Jayasimha Signion Systems Ltd., Hyderabad Abstract Power quality tariffs/ incentives provide an impetus to increased discipline in the emerging deregulated power network scenario. Periodic deviations from desired voltage and currents are measured by line frequency deviation, power factor and harmonics (magnitude and phases) while non-periodic deviations are measure...

Power Quality (PQ) modeling and evaluation is very important in recent times due to complexity the grid network this was based on injection of non-linear devices continuous introduction renewable energy sources (RES) into existing networks. The RES such as inverters, uninterruptible power supplies has contributed quality index short, medium, long interruptions, voltage dips, flickers, swells, s...

Multi Objective Optimal Power Flow including FACTS technology is one of the most important issues in power system planning and control. In this paper Artificial Intelligence techniques are used to solve the Multi Objective Optimum Power Flow incorporating FACTS devices with valve point effect. In this paper two objectives loss minimization and minimum voltage deviation are taken into considerat...

1 On leave from Polytechnical University of Catalunya, Spain. Abstract A reduced intrinsic threshold voltage (VT) in addition to its variability has a direct impact on circuit design. Worstcase design styles assume that all transistors use the same worst-case VT whose average and standard deviation come from inter-die statistical variations. However, intra-die differences, such as random local ...

In the research field of multilevel converters, three-level NPC (neutral-point-clamped) converters, which unfortunately may cause the deviation of the neutral-point voltage of DC-link capacitors, are widely discussed. Theoretically, virtual space vector modulation (VSVM) could guarantee the balance control of the neutral-point voltage. However, there still exist some uncontrollable space vector...

A linearly-tunable ULV transconductor featuring excellent stability of the processed signal common-mode voltage upon tuning, critical for very-low voltage applications, is presented. Its employment to the synthesis of CMOS gm-C highfrequency and voiceband filters is discussed. SPICE data describe the filter characteristics. For a 1.3V-supply, their nominal passband frequencies are 1.0MHz and 3....