A study was carried out on the valorization of different waste plastics (HDPE, PP, PS and PE), their mixtures biomass/HDPE by means pyrolysis in line oxidative steam reforming. thermodynamic equilibrium simulation used for determining reforming data, whereas previous experimental results were considered setting volatile stream composition. The adequacy this tool validated using obtained plastic...

Nonylphenol (NP) is used as an antioxidant and plasticizer in some plastic products. After the discovery of its endocrine-disrupting potential, concern over human exposure to this chemical has increased. Recently, a group in Germany estimated the average daily intake of NP from food (7.5 microg/day), excluding water. In the present study, NP, octylphenol (OP), and their respective ethoxylates (...

The objectives of this technical note are to review the gas transport mechanisms through flexible geomembranes, and to measure the methane gas transmission rate, permeance, and permeability coefficient of PVC, LLDPE, and HDPE geomembranes by performing the standard gas transport test (ASTM D1434). The measured methane gas permeability coefficient through a PVC geomembrane is 7.55 3 10 ml(STP).m...

Reducing emissions is essential for minimizing the impact of soil fumigation on the environment. Water application to the soil surface (or water seal) has been demonstrated to reduce 1,3-dichloropropene (1,3-D) emissions in soil column tests. This study determined the effectiveness of water application to reduce emissions of 1,3-D and chloropicrin (CP) in comparison to other surface seals under...

In this paper, the implications of melt compatibility on thermal and solid-state properties of linear low density polyethylene/high density polyethylene (LLDPE/HDPE) blends were assessed with respect to the effect of composition distribution (CD) and branch content (BC). The effect of CD was studied by melt blending a metallocene (m-LLDPE) and a Ziegler-Natta (ZN) LLDPE with the same HDPE at 19...

The effect that polymer molecular weight has on the dispersion of relatively polar montmorillonite (MMT) in nonpolar, unmodified high density polyethylene (HDPE) was examined. Polymer layered silicate (PLS) nanocomposites were prepared via melt compounding in a single screw extruder using three unmodified HDPE matrices of differing molecular weight and organically modified MMT (organoclay) in c...

Soil fumigation in greenhouses or agricultural fields often includes tarping the soil surface with polyethylene (PE) films to contain the fumigant in the soil and reduce emissions to the atmosphere. Previous research has demonstrated that PE films are permeable to methyl bromide and other fumigant compounds. In these experiments, the effect of temperature, fumigant mixtures, condensed water, an...

In the process of polyethylene extrusion polymer material similar to powder or granule is under compression, melting and transmission operation and on base of special form, extrudate has been produced. Twin-screw extruders are applicable in industries because of their high capacity. The powder mixing with chemical additives and melting with thermal and mechanical energy in three zones (feed, co...

Composite panels using virgin and recycled high-density polyethylene (VHDPE and RHDPE) and five types of natural fibers including four rice straw components (i.e., rice husk, rice straw leaf, rice straw stem, and whole rice straw) and wood fiber as control were made by melt compounding and compression molding. Fiber characteristics and the influences of fiber type and loading rate on HDPE cryst...