Solar collector (Air heater) has low thermal efficiency due to the low thermal conductivity between Air and absorber plate. So there is a need to enhance the thermal conductivity between air and absorber plate. This leads higher temperature to absorber plate and hence maximum thermal losses occurs to environment .It can be made possible by creating artificial roughness on absorber plate .There ...

This paper presents the characterization of integrated micromachined waveguide absorbers in the frequency band of 220 to 325 GHz. Tapered absorber wedges were cut out of four different commercially available semi-rigid absorber materials and inserted in a backshorted micromachined waveguide cavity for characterization. The absorption properties of these materials are only specified at 10 GHz, a...

An epoxy-modified urethane rubber mixed with carbon particles is now chosen as the millimeter-wave absorber material in our study. The absorption characteristics of the absorber is measured under temperature changes. The weatherability of our absorber is also clarified based on absorption characteristics, thickness and hardness of the sample. As a result of the temperature characteristics of th...

We investigate the average time for the earliest particle to hit a spherical absorber when a homogeneous gas of freely diffusing particles with density ρ and diffusivity D is prepared in a deterministic state and is initially separated by a minimum distance l from this absorber. In the high-density limit, this first absorption time scales as l D 1 ln ρl in one dimension; we also obtain the firs...

Detection peculiarities of an un-cooled (room temperature) 8×8 pixel array designed to image broadband THz radiation were investigated. Each pixel consists of a thin conductive film absorber on a dielectric membrane with thermopile temperature readout. It was designed and tested for four combinations of two different types of absorber and thermopile materials. The photo-response profile, determ...

The stability of wavy supercritical cylindrical Couette flow has been studied extensively, but few measurements of the velocity field in flow have been made. Particle image velocimetry was used to measure the azimuthal and radial velocities in latitudinal planes perpendicular to the axis of rotation for wavy cylindrical Couette flow in the annulus between a rotating inner cylinder and a fixed o...

Solar thermophotovoltaic (STPV) systems convert solar energy into electricity via thermally radiated photons at tailored wavelengths to increase energy conversion efficiency. In this work, we report the design and analysis of a STPV system with 2D photonic crystals (PhCs) using a high-fidelity thermal-electrical hybrid model that includes the thermal coupling between the absorber/emitter/PV cel...

The energy resolved efficiency of two bolometer detector prototypes for ITER with 4 channels each and absorber thicknesses of 4.5 μm and 12.5 μm, respectively, has been calibrated in a broad spectral range from 1.46 eV up to 25 keV. The calibration in the energy range above 3 eV was performed against previously calibrated silicon photodiodes using monochromatized synchrotron radiation provided ...

Two-directional differential phase contrast images were measured using an x-ray microbeam and a double wedge absorber. The wedge absorber converts the displacement of an x-ray beam that is refracted by an object into change of x-ray intensity. The double wedge absorber made it possible to detect values of two-directional refraction angle with microrad sensitivity simultaneously. By Fourier inte...

Solar air heater is a type of heat exchanger which transforms solar radiation into heat energy. The thermal performance of conventional solar air heater has been found to be poor because of the low convective heat transfer coefficient from the absorber plate to the air. It is attributed to the formation of a very thin boundary layer at the absorber plate surface commonly known as viscous sub-la...