In practice, clearances in the joints are inevitable due to tolerances, and defects arising from design and manufacturing. In the presence of clearance at a joint, a mechanism gains some additional, uncontrollable degrees of freedom which are the source of error. Moreover, joints undergo wear and backlashes and so cannot be used in precision mechanisms. In this study, the dynamic behaviour of ...

ti-6al-4v titanium alloy has great application in medicine and military industries due to its capabilities, namely high strength to weight ratio and corrosion resistance. in the current research, the effect of aging treatment on microstructure and wear behavior of ti-6al-4v titanium alloy was investigated. pin on disk wear test was applied to assess the wear behavior. specimens were first solut...

This paper describes micro-Raman spectroscopy of ultra-high molecular weight polyethylene wear debris isolated from revised knee replacements. The novel application of micro-Raman spectroscopy to the analysis of in vivo-generated wear debris was used to evaluate the chemical nature of individual, retrieved polyethylene particles. The analysis revealed the presence of beta-carotene on particles ...

An experimental investigation into material transfer and wear has been performed for the case of a ferrite probe sliding at high speeds (between 25 cm/set and 1250 cm/set) and low loads (10 gm) on a steel disk, a nickel plated disk, and a polymercoated disk, the latter containing finely dispersed abrasive particles. Autoradiographic methods together with microdensitometer analysis have been app...

\nG ABSTRACT An abrasive waterjet nozzle wear monitoring and compensating mechanism using the frequency domain.acoustic signals geneiated by the jet exiting the nozzle, as input, is prbposed. An artificial neural network which forms the critical iart of this system is developed using the _back-propagatlon algorithm. The trained network is capable of determining the nozzle diameter corresponding...

Microfabricated ball bearings have been demonstrated successfully in a number of microsystems, although a complete understanding of their tribological properties remains elusive. This paper investigates the wear mechanisms for a microfabricated ball bearing platform that includes silicon and thin-film coated silicon raceway/steel ball materials systems. Adhesion of ball material, found to be th...

The present study outlines the use of Taguchi parameter design to minimize the wear performance of electroless Ni-B coating by optimizing the tribological testing parameters. The tests are carried out in a multitribotester and the three parameters viz. load (L), speed (S) and time (T) are considered with three levels each. An L27 array is used to accommodate the three factors as well as their i...

Ni-based alloy powders with different contents of cobalt (Co) have been deposited on a 42CrMo steel substrate surface using a fiber laser. The effects of Co content on the microstructure, composition, hardness, and wear properties of the claddings were studied by scanning electron microscopy (SEM), an electron probe microanalyzer (EPMA), X-ray diffraction (XRD), a hardness tester, and a wear te...

Wear particle-induced periprosthetic osteolysis remains the principal cause of aseptic loosening of orthopaedic implants. Monocytes/macrophages phagocytose wear particles and release cytokines that induce inflammatory response. This response promotes osteoclast differentiation and osteolysis. The precise mechanisms by which wear particles are recognized and induce the accumulation of inflammato...

Previous work has shown that wing wear increases mortality in bumblebees. Although a proximate mechanism for this phenomenon has remained elusive, a leading hypothesis is that wing wear increases predation risk by reducing flight manoeuvrability. We tested the effects of simulated wing wear on flight manoeuvrability in Bombus impatiens bumblebees using a dynamic obstacle course designed to push...