Titanium alloys have found increased applications in various industrial sectors. One of the critical issues in quality control is the weld penetration during welding. In the present paper, tungsten inert gas (TIG) welding of Ti-6Al-4V alloy with and without an activating flux was conducted. The effect of the activating flux on Ti alloy welding was investigated. A data acquisition system was use...

Titanium-alloy weldments have been extensively used in engineering structures, and accurate estimation of the fatigue life is beneficial for avoiding catastrophic failures in titanium-alloy structures. The weld pore is a common defect in these weldments that significantly influences the fatigue process. In this study, the weld-pore size and depth and its effect on the fatigue life of Ti-6Al-2Zr...

Hardness is a very important mechanical property of materials. But during welding high heating and rapid cooling influence the hardness of the weld as well as heat affected zone (HAZ). In the present investigation, 10 rectangular single V-butt manually arc welded mild steel specimens having bevel angle 60 ̊ and 70 ̊ (5 specimens each) have been experimented with. The hardness of weld as well as h...

In non-destructive testing (NDT) of metal welds, weld line tracking is usually performed outdoors, where the structured light sources are always disturbed by various noises, such as sunlight, shadows, and reflections from the weld line surface. In this paper, we design a cross structured light (CSL) to detect the weld line and propose a robust laser stripe segmentation algorithm to overcome the...

The tarnished plant bug, Lygus lineolaris (Palisot de Beauvois), is a pest of various fruit, vegetable, Wber, and seed crops; including cotton. Lygus spp. populations often build on alternate host plants before moving to cotton, and in the midsouthern U.S. wild host plants, such as pigweed (Amaranthus spp.), play a major role in L. lineolaris population development. Three isolates of the entomo...

The aim of this research was to investigate the influence of metallurgy on the corrosion behaviour of separate weld zone (WZ) and parent plate (PP) regions of X65 pipeline steel in a solution of deionised water saturated with CO2, at two different temperatures (55 °C and 80 °C) and at initial pH~4.0. In addition, a non-electrochemical immersion experiment was also performed at 80 °C in CO2, on ...

Modern hardware is difficult to use efficiently, requiring complex optimizations like vectorization, loop blocking and load balancing to get good performance. As a result, many widely used data processing systems fall well short of peak hardware performance. We have developed Weld, an intermediate language and runtime that can run data-parallel computations efficiently on modern hardware. The c...

Pressure vessels operating at elevated temperatures and pressures are made of creep resisting plate and welded from individual components using the MAG welding process. The paper proposed focuses on the occurrence of lack-of-fusion defects in MAG welded plate components of pressure vessels. Lack of fusion, which is a planar defect and is, therefore, difficult to detect by common NDT methods, ca...

Continuous real time structural health monitoring will be a requirement for future space launch missions. Reusable metallic cryotanks manufactured using Friction Stir Welding (FSW) technology for multiple missions, demands weld and microstructural integrity. The FS weld contains multiple interfaces and a variety of microstructures. To develop NDE-based health monitoring capability which detects...

The solidification process in a weld pool has been shown to have a considerable influence upon the properties of the resultant weld. It influences the development of microstructure (Edvardsson et al., 1976), and determines the distribution of alloying elements, and hence the homogeneity of the weld. Previous work on the cooling behaviour of welds (Garland and Kirkwood, 1974; Svensson et al., 19...