Glass/carbon fiber reinforced plastic (GFRP/CFRP) and hybrid components have attracted increasing attention in lightweight applications. However, residual stresses induced the manufacturing process of these can result warpage and, eventually, negatively affect mechanical performance composite structures. In present work, GFRP, CFRP, GFRP/steel CFRP/steel were manufactured through prepreg-press-...

This study discusses the behavior of ambient-cured circular geopolymer concrete specimens tested under different loading conditions. Twelve were cast and to investigate influence type reinforcement, that is, steel glass fiber-reinforced polymer (GFRP), pitch transverse conditions (concentric axial load, 15 35 mm eccentric four-point bending). The load carrying capacity, confinement efficiency, ...

Characterisation of materials subject to high velocity deformation is necessary as many materials behave differently under such conditions. It is particularly important for accurate numerical simulation of high strain rate events. High velocity servo-hydraulic test machines have enabled material testing in the strain rate regime from 1 – 500 ε/s. The range is much lower than that experienced un...

Fibre composites are being used in various applications from aerospace, military, marine boats and submarine to renewable energy generation. Higher energy demands across the developed and growing world for the usage and replacement of conventional materials with polymer composite materials for engineering applications which is always questioned by the end user, unless the research oriented reli...

A mechanical device especially designed for the application of low-level posttensioning forces to glass fiber reinforced polymer (GFRP) bars was developed at the University of Missouri-Rolla. Some of the advantageous features of this device are that it is simple to assemble and the low-level post-tensioning forces can be applied manually and safely without the need for hydraulic jacks or heavy ...

This paper describes fractographic features observed in aerospace composites failed under tensile loads. Unidirectional Carbon Fibre Reinforced Plastic (UD CFRP) and Unidirectional Glass Fibre Reinforced Plastic (UD GFRP) composite specimens were fabricated and tested in tension. The morphology of fractured surfaces was studied at various locations to identify failure mechanism and characterist...

This paper presents the details of a research program that was conducted to evaluate the two-way bending behavior of 3-D glass fiber reinforced polymer (GFRP) sandwich panels. The panels consist of GFRP skins with a foam core and through-thickness fiber insertions. While the behavior of these panels under one-way bending is relatively well understood the behavior under two-way bending has not y...

This paper describes the behaviour of two full-scale models of a portion of highway bridge slab reinforced with fibre reinforced polymer (FRP) reinforcement. The first slab was reinforced totally with carbon FRP (CFRP), and the second slab was reinforced with hybrid glass FRP (GFRP) and steel reinforcement. The models were tested under static loading up to failure using a concentrated load acti...

Shear failure of B-C joints is recognized as the primary cause collapse various moment-resisting frame buildings during recent earthquakes. When joint subjected to huge forces severe ground shaking and its behaviour has a very much influencing on structure, sometimes it may Leeds entire structure. To study energy dissipation with different types combinations FRP sheets used retrofit BC in this ...