A comparative study about the possible inhibitor effect on atmospheric conditions of three compound of the family of 2-oxazoline using modern electrochemical techniques was carried out. These compounds were obtained through non conventional chemical synthesis using microwaves. The compounds studied were 2-bencyl-4,4dihydroximethyl-2-oxazoline; 2-heptadecenyl-4,4-bis(estearoiloximethyl)2-oxazoli...

FATIGUE BEHAVIOR AND MICROSTRUCTURE EXAMINATIONOFAISI D2 TRIM DIESbyXINCHEN WANGDecember 2013Advisor: Dr. Xin WuMajor: Mechanical EngineeringDegree: Master of ScienceAISI D2 steels are widely used as tools for forming, drawing and trimming diesdue to its high wear resistance, high compressive strength and low distortion, and itsperformance as a tr...

There are many industries where austenitic stainless steel needs to be welded specially in power generation industries. Unfortunately the austenitic stainless welding has several fabrication and metallurgical drawbacks when welded by using conventional fusion welding methods, which can often leads to in-service failure. The most pronounced fabrication faults are hot cracks due to inadvertent us...

This study investigates the effects of cutting parameters on surface roughness (Raμm ), cutting temperature (T0C) at the chip tool interface and the material removal rate (MRR mm3/min) during hard machining of AISI 1015 (43 HRC) steel using carbide insert under dry and spray impingement cooling environment. A combined technique using orthogonal array and analysis of variance (ANOVA) was employe...

In this research the interface structure of dissimilar joint between AISI 4130 and AISI316L steels produced by GTAW process was evaluated. ERNiCr-3 was used as a filler metal for this joint. After welding the microstructure of different areas including weld metals, heat affected zones and interfaces were studied by optical microscope (OM), scanning electron microscope (SEM) and energy dispersiv...

This study focuses on the semiconductor properties of passive films formed on AISI 420 stainless steel immersed in four nitric acid solutions under open circuit potential (OCP) conditions. For this purpose, the passivation parameters and semiconductor properties of passive films were derived from potentiodynamic polarization and Mott–Schottky analysis, respectively. The OCP plots showed that th...