William G. Fahrenholtz o 9m Ceramic Engineering Department ‘so University of Missouri-Rolls w~!!l Rolls, MO 65409 + <. +# Metal-reinforced Alz03-matrix composites were prepared using reactive hot pressing. The volume fraction of the reinforcing phase was controlled by the stoichiometry of the particular displacement reaction used. Dense Alz03-Ni and Al@3-N’b composites were fabricated using thi...

In the present work, the room and elevated temperature mechanical behavior of Al/TiC, high-strength Al-Si/TiC and the elevated temperature-resistant Al-Fe(-V-Si)/TiC composites has been evaluated. The microstructural characteristics of ingot metallurgy (IM) or rapid solidification (RS) Al-Si/TiC and Al-Fe(-V-Si)/TiC composites could be thought of as a combination of the related alloy matrix mic...

The influence of dipping in hot salt solution on water absorption in nylon6 composites with dispersed aluminum powders was investigated. Dipping in hot salt solution (3mass%NaCl in distilled water) for 10 s at 373K increased the overweight of composite samples, whereas the addition of aluminum with dispersed powders (A1-addition) from zero to 40 vol%Al decreased the overweigh of the sample. Bas...

Abstract: In this study Al-5 (Vol) % SiCp nanocomposite powder has been successfully synthesized by high-energy planetary milling of Al and SiC powders for a period of 25 h at a ball-to-powder ratio of 15:1. The changes of the lattice strain, the crystallite size of the matrix phase, and the nanocomposite powder microstructure with time have been investigated by X-ray diffraction (XRD), X-ray m...

in this study, multi wall carbon nanotubes (mwcnts) were synthesized by chemical vapor deposition (cvd) method using two different catalysts (fe nanoparticles) and (ni nanoparticles) with  two different substrates: quartz and alumina. acetylene gas was used as a carbon source and argon as a carrier gas at different temperatures and different times to study the effects of these parameters on cnt...

Tension experiments in vacuum were performed on a monolithic Si3N4 sample at 1375°C and a 20Vol% SiCp-Si3N4 composite sample at 1400°C using the new SMARTS diffractometer at the Los Alamos Neutron Science Center. The deep penetration of neutrons facilitated these in-situ studies. In particular, the hkl-dependent strains were measured and the results interpreted by Eshelby-based modeling for the...