This paper investigates axial compression process of multi-layered tubes with circular cross-section under the axial loading in the quasi-static condition using experimental method. Some specimens are prepared in seven different groups, namely; empty carbon/epoxy composite tubes, solid carbon/epoxy composite rods, empty copper tubes, composite tubes with silicon sealant filler, concentrically s...

the effects of physical, thermal and mechanical parameters on curing microthermal residual stresses are studied, based on the energy method, to present a theoretical solution for prediction of residual stress felds. a fnite element analysis is developed to compare the theoretical and numerical results together. there is found to be a good agreement between the results of the two methods. howeve...

using  principle  of  minimum  total  potential  energy  approach  in conjunction  with  rayleigh-ritz  method,  the  electro-thermo-mechanical  axial  buckling  behavior  of  piezoelectric  polymeric cylindrical  shell  reinforced  with  double-walled  boron-nitride nanotube  (dwbnnt)  is  investigated. coupling  between  electrical and mechanical  fields  are  considered  according  to  a  re...

In this paper, classical thin shell theory is used to analyze vibration and critical speed of simply supported rotating orthotropic cylindrical shell. The effects of centrifugal and Coriolis forces due to the rotation are considered in the present for‌mulation.. In addition, axial load is applied on cylinder as a ratio of critical buckling load. Finally the effects of orthotropic ratio, materia...

equatorial/axial conversion in piperidine and phosphorinane with different substituents wereinvestigated with great details. three possible routes, i.e. heteroatom inversion and two ring inversiontype were considered. ring conversion can occur via two pathways one starts with ring flatteningfrom the heteroatom site (nitrogen in piperidine and phosphorous in phosphorinane) and the otherinitiates...

introduction: determining the proper angle for inserting central venous catheter (cv line) is of great importance for decreasing the complications and increasing success rate. the present study was designed to determine the proper angle of needle insertion for internal jugular vein catheterization.  methods: in the present case series study, candidate patients for catheterization of the right i...

in fact the most suitable method for finding the load bearing capacity of a member under the axial load or axial load and bending is make use of the interaction diagrams. to analysis and design the hollow circular, square and rectangular high strength concrete (hsc) column shapes, a linear strain variation was assumed in the cross-section height of the members and then the static equilibrium eq...

existence of cracks in industrial structures is one of the important causes of their failure, especially when they are subjected to important axial compressive forces that might lead to buckling. therefore, it must be considered in stress analysis and designing and loading of such structures. in this paper, the buckling and post-buckling behaviors of stainless-steel cracked plates under axial c...

Three dogs (Boxer, Labrador Retriever and German Shepherd) between the age of 7-10 years were presented with the history of tumour masses on right caudo-lateral thigh, right cranial forearm and left cranial and caudal thoracic mammary gland region, respectively. Fine needle aspiration cytology of the tumour masses and the sentinel regional lymph nodes were done. Plain radiography was done to ru...