This paper explores the single-phase and two-phase cooling performance of a hybrid micro-channel/slot-jet module using HFE-7100 as working fluid. Three-dimensional numerical simulation using the k–e turbulent model is used to both assess the single-phase performance and seek a geometry that enhances heat removal capability and surface temperature uniformity while decreasing mean surface tempera...

In this tutorial the fundamentals of non-boiling heat transfer in two-phase twocomponent gas-liquid flow in pipes are presented. The techniques used for the determination of the different gas-liquid flow patterns (flow regimes) in vertical, horizontal, and inclined pipes are reviewed. The validity and limitations of the numerous heat transfer correlations that have been published in the literat...

We study heat transfer from a heated nanoparticle into surrounding fluid using molecular dynamics simulations. We show that the fluid next to the nanoparticle can be heated well above its boiling point without a phase change. Under increasing nanoparticle temperature, the heat flux saturates, which is in sharp contrast with the case of flat interfaces, where a critical heat flux is observed fol...

This chapter provides the engineer and the researcher with correlations and models for the prediction of the critical aspects of the boiling heat transfer of mixtures. This chapter offers a reliable, hands-on resource for solving common problems across pool boiling and flow boiling applications such as miscible mixtures, refrigerant/lubricant mixtures, additives, and refrigerant/nanolubricants....

In this work, the characteristics of flow and heat transfer of a fluid containing nano particles of aluminum oxide with the water volume fraction (0.1-0.2-0.3)(V/V) percent of the reports. The overall heat transfer coefficient, heat transfer and the average heat transfer fluid containing nano water - aluminum oxide in a horizontal double pipe counter flow heat exchanger under turbulent flow con...

Critical Heat Flux, or CHF, is an important condition that defines the upper limit of safe operation of heat transfer equipment employing boiling heat transfer in heat flux controlled systems. Although significant research has been conducted in this field, a clear understanding of the basic mechanisms leading to the CHF condition is still lacking. The present article covers the subcooled flow b...

Experiments are conducted with a perfluorinated dielectric fluid, Fluorinert FC-77, to investigate the effects of channel size and mass flux (225–1420 kg/ms) on microchannel flow boiling regimes by means of high-speed photography. Seven different silicon test pieces with parallel microchannels of widths ranging from 100 to 5850 lm, all with a depth of 400 lm, are considered. Flow visualizations...

Quenching of small stainless steel rods in pure water and nanofluids with alumina and diamond nanoparticles at low concentrations (0.1 vol%) was investigated experimentally. The rods were heated to an initial temperature of ~1000 C and then plunged into the test fluid. The results show that the quenching behavior of the nanofluids is nearly identical to that of pure water. However, due to nano...