Two different cases regarding the zinc coating at the lap joint faying surface are selected for studying the influence of zinc vapor on the keyhole dynamics of the weld pool and the final welding quality. One case has the zinc coating fully removed at the faying surface; while the other case retains the zinc coating on the faying surface. It is found that removal of the zinc coating at the fayi...

Determination of the local interlaminar stress distribution in a laminate with a bolt-filled hole is helpful for optimal bolted joint design, due to the three-dimensional (3D) nature of the stress field near the bolt hole. A new interlaminar stress distribution phenomenon induced by the bolt-head and clamp-up load, which occurs in a filled-hole composite laminate, is investigated. In order to e...

0020-7683/$ see front matter 2008 Elsevier Ltd. A doi:10.1016/j.ijsolstr.2008.11.016 Abbreviations: ASTM, ASTM International; CC, co continuous cohesive zone method; CPE4I, bilinear inc elements; DACE, design and analysis of computer cantilever beam; DCZM, discrete cohesive zone metho finite element; LEFM, linear elastic fracture mech sampling; SLJ, single lap joint; TTL, trapezoidal tractio * ...

In order to study the mechanical properties of ZT7G/LT-03A carbon fiber reinforced composite bolted joints, single-bolt double-lap joints tests were carried out with 3 kinds ply and width, effects different ratios, width diameter ratios on failure load mode analyzed. Then, process specimens was simulated by using progressive damage analysis method. The model are consistent that specimen, which ...

Dynamic response of single lap joints, subjected to a harmonic peeling load is studied theoretically and experimentally. In the theoretical part, dynamic response of a single lap joint clamped at one end and subjected to a harmonic peeling load at the other end is investigated. Adherents are modeled as Euler-Bernouli beams joined in the lap area by a viscoelastic adhesive layer. Both axial and ...

Lap joints of commercially pure magnesium plates to aluminium plates (Magnesium plate on the top, and Aluminium plate, grade 1100, on the bottom side) were conducted by friction stir welding using various traveling and rotation speeds of the tool to investigate the effects of the welding parameters on the joint characteristics and strength. Defect-free lap joints were obtained in the welding tr...