One distinct concentration of copper ions was embedded into the silica matrix to xerogel form using copper source Cu(NO3)2∙3H2O. The xerogel samples were prepared with using hydrolysis and condensation reactions of TetraEthyl Ortho-Silicate (TEOS) by the sol-gel method. In this investigation, new molar ratio of H2</su...

A novel approach for the recovery of spent activated carbon by an advanced oxidation process using iron oxide-based nanocatalysts was proposed and investigated. Model organic contaminants, such as ethylene glycol and phenol, were chosen for this study as water pollutants. It was shown that there are several advantages in using catalytic oxidation recovery of activated carbon with iron oxide-bas...

Citation: Castro-Muñiz A, Hoshikawa Y, Komiyama H, Nakayama W, Itoh T and Kyotani T (2016) Improving the Direct Electron Transfer in Monolithic Bioelectrodes Prepared by Immobilization of FDH Enzyme on Carbon-Coated Anodic Aluminum Oxide Films. Front. Mater. 3:7. doi: 10.3389/fmats.2016.00007 improving the Direct electron Transfer in Monolithic Bioelectrodes Prepared by immobilization of FDh en...

Different types of crystalline carbon nanomaterials were used to reinforce polyaniline for use in electromechanical bilayer bending actuators. The objective is to analyze how the different graphitic structures of the nanocarbons affect and improve the in situ polymerized polyaniline composites and their subsequent actuator behavior. The nanocarbons investigated were multiwalled carbon nanotubes...

The study investigates the effect of aluminium oxide nanoparticles as an additive to Madhuca Indica (mahua) methyl ester blends on performance, emission analysis of a single-cylinder direct injection diesel engine operated at a constant speed at different operating conditions. The test fuels are indicated as B10A0.2, B10A0.4, B20A0.2, B20A0.4 and diesel respectively. The results indica...

The study investigates the effect of aluminium oxide nanoparticles as an additive to Madhuca Indica (mahua) methyl ester blends on performance, emission analysis of a single-cylinder direct injection diesel engine operated at a constant speed at different operating conditions. The test fuels are indicated as B10A0.2, B10A0.4, B20A0.2, B20A0.4 and diesel respectively. The results indica...

Porous graphene oxide can be used as a metal-free catalyst in the presence of air for oxidative coupling of primary amines. Herein, we explore a GO-catalyzed carbon-carbon or/and carbon-heteroatom bond formation strategy to functionalize primary amines in tandem to produce a series of valuable products, i.e., α-aminophosphonates, α-aminonitriles, and polycyclic heterocompounds. Furthermore, whe...

For the first time, both X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES) techniques were applied in analysis of surface contamination of electrochemically etched Scanning Tunneling Microscope (STM) tungsten tips. Carbon monoxide, graphite, tungsten carbide and tungsten oxide were found as main surface contaminations of STM tungsten tips. The thickness of tungsten ox...

Iron occurs mainly as oxide ores, though it is also found in smaller quantities as its sulfide and carbonate. These other ores are usually first roasted to convert them into the oxide. On a world scale the most important ore is haematite (Fe2O3), but in New Zealand the starting materials are magnetite (Fe3O4) and titanomagnetite (Fe2TiO4). The oxides are reduced with carbon from coal, through t...

A simple single-stage approach, based on the hydrothermal technique, has been introduced to synthesize reduced graphene oxide/titanium dioxide nanocomposites. The titanium dioxide nanoparticles are formed at the same time as the graphene oxide is reduced to graphene. The triethanolamine used in the process has two roles. It acts as a reducing agent for the graphene oxide as well as a capping ag...