Statement of problem. The effect of gold electroforming on gold alloy was not studied. Purpose. This in vitro study investigate the effect of gold electroforming on gold-silver-palladium alloy. Material and methods. Three pieces of gold strips had undergone the electroforming procedures on one side and then half of the side again electroformed. The set mode for this study was program 1 (200 μm)...

In order to form model aluminide coatings for studying critical issues related to their high temperature oxidation and corrosion performance, a laboratory chemical vapor deposition (CVD) procedure is being used to more rigorously control the coating process in terms of composition, purity and microstructure. One ferritic (Fe-9Cr1Mo) and one austenitic alloy (304L) were selected as substrate mat...

TRISO (Tri-Isotropic)-coated fuel particle is widely applied due to its higher stability at high temperature and its efficient retention capability for fission products in the HTGR (high temperature gas-cooled reactor), one of the highly efficient Generation IV reactors. The typical balltype TRISO-coated fuel particle with a diameter of about 1 mm is composed of a nuclear fuel particle as a ker...

A new nondestructive technique, confocal scanning laser microscopy (CSLM), is described which is used to characterize the topography and morphology of polymer coatings. The topography of the coating can be determined even when the coating is completely opaque. When the coating is not completely opaque, CSLM has the distinct advantage of also being able to distinguish between the coating surface...

The excellent hydrodynamic properties of fishes enable them to respond rapidly exterior excitation in water. In this study, three types bionic surfaces were designed and manufactured based on the construction mechanical tuna skin. surface coating features these analyzed, their drag reduction performance was investigated a circulating water tunnel. results revealed that effect proportional flexi...

A protective coating has been applied onto the phosphated panels using cathodic electrocoating in two different dry film thickness namely 8µm and 20µm. The corrosion resistance of cathodic electrocoatings has been studied using AC/DC/AC method. Twelve cycles of AC/DC/AC test were carried out on each sample which the DC voltage of the first 6 cycles were -4 V VS. Ag/AgCl @ 20 minutes followed by...

Viscous heating becomes significant in the high speed resin coating process of glass fibers for optical fiber manufacturing. This study focuses on the coating resin flows inside the capillary coating die of optical fiber coating applicator and they are numerically simulated to examine the effects of viscous heating and subsequent temperature increase in coating resin. Resin flows are driven by ...

Friction surfacing is an emerging surface engineering technology, developed on the basic principle of friction welding, for depositing wear and corrosion resistant metallic coatings. In the present work coating of tool steel M2 were made on mild steel by friction surfacing by using 2 factorial designs with 3 factors at two levels for each. Process parameters developed a satisfactory deposition ...

Nanodroplets residing near wedges or edges of solid substrates exhibit a disjoining pressure induced dynamics. Our nanoscale hydrodynamic calculations reveal that nonvolatile droplets are attracted or repelled from edges or wedges depending on details of the corresponding laterally varying disjoining pressure generated, e.g., by a possible surface coating.

In the present research, amorphous Fe73.5Si13.5B9Nb3Cu1 Finemet foils, 21-26µm in thickness and 5mm in width, were prepared by Planar Flow Casting (PFC) process. Wound cores of amorphous Finemet foils were simultaneously annealed and heat treated at 540°C for 60, 120 and 240 minutes in steam and air flow to form oxide insulating coating layer on both surfaces of the foils. The structure of nano...