Yttria-stabilized zirconia (YSZ) is the best known ceramic-oxide material employed as a component of either solid electrolyte or anode cermet material for intermediate solid oxide fuel cell (IT SOFC). The properties of traditionally produced (by mechanical mixing of oxides) Al2O3/3YSZ composite with the same composition materials obtained by citrate and impregnation methods and with properties ...

The preparation and the characterization of novel geopolymer-based hybrid composites are reported. These materials have been prepared through an innovative synthetic approach, based on a co-reticulation in mild conditions of commercial epoxy based organic resins and a metakaolin-based geopolymer inorganic matrix. This synthetic strategy allows the obtainment of a homogeneous dispersion of the o...

During the past 15 years NASA has taken the lead role in exploiting the benefits of textile reinforced composite materials for application to aircraft structures. The NASA Advanced Composites Technology (ACT) program was started in 1989 to develop composite primary structures for commercial transport airplanes with costs that are competitive with metal structures. As part of this program, sever...

During the past few decades, materials design has shifted emphasis to pursue low cost, quality, light weight, environment friendliness, and performance. Aluminium matrix composites are important class of engineering materials used in aerospace, automotive, engineering, defence and other industries because of their lower density, higher specific strength, and better physical and mechanical prope...

The aim of this study was to evaluate the viscoelastic properties of novel low-shrinking composites and compare them to those of packable composites. Six materials were tested: Clearfil Majesty Posterior (CM), ELS Extra Low Shrinkage (EL), Filtek P60 (FP), Filtek Silorane (FS), Prodigy (PR) and Surefil (SU). Static and dynamic testing was performed and materials were tested dry and wet at diffe...

In this paper, the elastic properties of passive materials (matching, backing and lens materials) for ultrasound transducers are explored at room temperature in the frequency range of 25-65MHz using the ultrasonic spectroscopy method. AlurninaJEPOTEK 301 and tungsten/EPO-TEK 301 composites were fabricated and measured. Experimental results display a monotonic rise in acoustic impedance of the c...

The purpose of this study was to measure mass loss and surface roughness changes of different brands of flowable resin composites after a simulated toothbrushing test. The null hypotheses were that there would be no differences in mass loss and no significant changes in surface roughness after this test and that there would be no correlation between the two variables. The tested materials were ...

reasons for the limited lifespan of those restorations.2-5 Predominantly in recent years, these inadequacies have been greatly reduced through further developments in the materials of the composite and adhesive systems.6 Nevertheless, the negative effects of polymerisation shrinkage – such as poor marginal integrity, insufficient adherence to the cavity walls or cusp deflections – still represe...

In this study, we combine the elastic instability and non-linear rate-dependent phenomena to achieve microstructure tunability in soft layered materials. In these soft composites, elastic instabilities give rise to formation of wrinkles or wavy patterns. In elastic materials, the critical wavelength as well as amplitude at a particular strain level are exclusively defined by the composite micro...