this paper presents theoretical and numerical state-of-the-art information in the field of hygro-thermo-mechanical deformation simulation in structural concrete. the aspects discussed include coupled hygro-thermo-mechanical performance of porous materials including concrete, multi-scale simulation of concrete properties especially the volumetric and structural deformation performance, and the m...

the directional response and roll stability characteristics of a partly filled tractor semi-trailer vehicle, with cylindrical tank, are investigated in various maneuvers. the dynamic interaction of liquid cargo with the tractor semi-trailer vehicle is also evaluated by integrating a dynamic slosh model of the partly filled tank with five-degrees-of-freedom of a tractor semi-trailer tank model. ...

Three concrete mix proportions were designed and prepared, respectively, such as fly ash concrete (abbreviated as “FAC”) with 30% fly ash replacement ratio of cement, fly ash, and slag concrete (abbreviated as “FSC”) with each of 20% fly ash and slag replacement ratio and ordinary Portland cement concrete (abbreviated as “OPC”) for the research of carbonation and chloride resistance of concrete...

The subject of petroleum storage tank fires has gained a great deal of attention due to the high cost of petroleum, and the consequent disruption of petroleum production; therefore, much of the current research has focused on petroleum storage tank fires. Also, the number of petroleum tank fires is oscillating between 15 and 20 fires per year. About 33% of all tank fires are attributed to light...

The inspection of a storage tank floor is a time consuming and expensive procedure, mainly due to necessity to empty and to clean the tank before an inspection. For this purpose a long range ultrasonic technique based on Lamb waves may be applied. Such an approach is used for inspection of pipes and can cover the distances up 100m. However the storage tanks are much more complicated structures ...

Original scientific paper This paper presents designing of spherical tank using combination of analytical procedure with FEM analysis and experimental testing in order to minimize design time and verify design strength. Analytical procedure for calculation of the tank strength in the initial stages of design process is briefly presented. Based on analytical results, tank is dimensioned and FEM ...

Thermodynamic analysis and numerical modeling of hurricane intensity has shown that its is controlled by the enthalpy transfer from the ocean surface and by drag. Direct measurements of drag, evaporation, and sensible heat transfer are not easily performed on the high seas. Therefore, a wind wave tank has been constructed in which a few aspects of a tropical storm are simulated. The air velocit...

todays applying concrete structures is more usual than other structures which are used in buildings as in most of the world’s countries the application ratio of concrete to steel has increased from 10 to 1. sometimes these structures require strengthening vulnerable members because of deficiency in their loading system in usual and critical conditions. there are different methods for strengthen...

There is an increasing interest in using ultrasonic guided waves to assess the structural degradation of above-ground storage tank floors. This is a non-invasive and economically viable means of assessing structural degradation. Above-ground storage tank floors are ageing assets which need to be inspected periodically to avoid structural failure. At present, normal-stress type transducers are b...

Groundwater management is a significant task to have sustainable groundwater sources in Afghanistan especially in Kabul Basin. In this study, the groundwater level fluctuation simulation and forecast by a traditional tank model, snow tank + traditional tank model (S + traditional tank), combined tank model and snow combined tank model (SC-tank model) were compared. The variables (precipitation,...