The paper examines the development of models of steam generation plant using linear identification techniques. The identification process is carried out using experimental data of a multi-input multi-output MIMO system representation. Various techniques of modeling and identification are applied considering the complete system as a MIMO model and studying the effect of all the inputs on individ...

Eryngium caucasicum Trautv. (Apiaceae) is a perennial herbaceous plant with about one meter height, an endemic species that has been distributed in the northern parts of Iran. The plant leaves are normally used in medicine and food industries in Iran.The plant has several medicinal properties including enforcing generative power, diuretic, lenitive and appetizer. In this research differents par...

In early February 2000, primary-to-secondary tube leakage ranging from one to four gallons per day (gpd) was detected in steam generator (SG) No. 24. On February 15, 2000, while the unit was operating at 99% power, SG leakage rapidly increased from 4 gpd to greater than 75 gallons per minute (gpm). The reactor was manually tripped 13 minutes later, and the faulted steam generator was isolated o...

This paper presents a mixed-integer nonlinear programming (MINLP) model for performing structural and parameter optimization of utility plants that satisfy given electrical, mechanical and heating demands of industrial processes. In this model a nonlinear objective function that accounts for the cost of equipment and operation is minimized. The proposed approach allows for the simultaneous opti...

Oxyfuel-firing of a steam boiler is a low risk high-efficiency technique for CO2 capture in a power plant. Oxyfuel-firing can be readily adapted to a new power plant or to retrofit applications. Development and design of pulverized coal and circulating fluidized bed oxyfuel boilers and balance of plant equipment have been conducted to identify the required specific features, which will maximize...

Reliability and availability of power stations are extremely important in order to achieve a required level of power generation. In particular, in the hot desert climate of Kuwait, reliable power generation is extremely important because of cooling requirements at temperatures exceeding 50-centigrade degrees. In this paper, a particular power plant, named Sabiya Power Plant, which has 8 steam t...

Now a days, In most of the thermal power plant, where low-pressure steam is being exhausted to the atmosphere as a waste steam. This waste heat could be use to operate many small preheating or cooling equipments or small scale plants. There are many refrigeration systems present for refrigeration and air condition purpose. Such as air refrigeration, vapour compression, vapour absorption etc. In...

Capacity and efficiency of any refrigerating system diminish rapidly as the difference between the evaporating and condensing temperature is increased by a reduction in the evaporator temperature. The single stage vapour compression refrigeration system using various refrigerants are limited to an evaporator temperature of -40 0C. Below temperature of -40 0C the either cascade refrigeration sys...

Poor control of steam generator water level is the main cause of unexpected shutdowns in nuclear power plants. Particularly at low powers, it is a difficult task due to shrink and swell phenomena and flow measurement errors. In addition, the steam generator is a highly complex, nonlinear and time-varying system and its parameters vary with operating conditions. Therefore, it seems that design o...